홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

N,N-Dimethyl-1,3-propanediamine → styrene N-(3-dimethylaminopropyl)maleimide

HRID 1658154
인쇄

반응식

HRID 1658154 반응식
[CH:1]([C:9]1=[CH:10][C:11]([O:13][C:14]1=[O:15])=O)=[CH:2][C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1.C=CC1C=CC=CC=1.C1C(=O)OC(=O)C=1.[CH3:31][N:32]([CH3:37])[CH2:33][CH2:34][CH2:35][NH2:36]>CN(C)C=O>[CH2:1]=[CH:2][C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1.[CH3:31][N:32]([CH3:37])[CH2:33][CH2:34][CH2:35][N:36]1[C:14](=[O:15])[CH:9]=[CH:10][C:11]1=[O:13]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 7993N,N-Dimethyl-1,3-propanediamineHCID 62707Lytron 810HCID 54215275Styrenemaleic anhydride

생성물 1

HCID 3080809styrene N-(3-dimethylaminopropyl)maleimide

시약·촉매·용매 1

HCID 6228Dimethylformamide용매

반응 조건

온도
110 °C

실험 절차

A solution of 250 g of copoly(styrene-maleic anhydride (commercially available from the Monsanto Chemical Company under the tradename of Lytron 810) in 2500 ml of dry dimethylformamide is made by stirring in a 5-liter flask, containing a reflux condenser, thermometer, stirrer, and dropping funnel. The mixture is heated to 110°C and 230 g of N,N-dimethyl-1,3-propanediamine is added slowly at a rate to keep the mixture boiling slightly. Polymer precipitates as a gummy mass at first but goes back into solution after about half of the amine is added. The condenser is replaced by a distillation column and about 500 ml of material is removed by distillation with stirring. The residue is cooled, precipitated in water, collected by filtration and air-dried at room temperature for 2 days. The solid is dissolved in acetone, and again precipitated in water and air-dried. Yield = 260 g of off-white, friable solid.

후처리

  1. additioncontaining a reflux condenser
  2. customthermometer, stirrer, and dropping
  3. customPolymer precipitates as a gummy mass at first but
  4. additionis added
  5. distillationThe condenser is replaced by a distillation column and about 500 ml of material
  6. customis removed by distillation
  7. stirringwith stirring
  8. temperatureThe residue is cooled
  9. customprecipitated in water
  10. filtrationcollected by filtration
  11. customair-dried at room temperature for 2 days
  12. dissolutionThe solid is dissolved in acetone
  13. customagain precipitated in water
  14. customair-dried

출처 및 근거

ORD 기록
ord-3272e17f5fcf442d80bddb8539f740db
출처 데이터셋
uspto-grants-1976_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US03962527

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트