홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium Chloride → 1,2-Diethenylbenzene

HRID 1658476
인쇄

반응식

HRID 1658476 반응식
[Cl-].[Na+].[CH:3]1[C:8](O)=[C:7](O)[C:6](O)=[CH:5][C:4]=1[C:12](OC1C=[C:17]([C:23]([O:25][CH2:26][C@H:27]2[O:32][C@@H:31](OC(C3C=C(O)C(O)=C(OC(C4C=C(O)C(O)=C(O)C=4)=O)C=3)=O)[C@H:30]([O:56][C:57]([C:59]3C=C(O)C(O)=C(OC(C4C=C(O)C(O)=C(O)C=4)=O)C=3)=O)[C@@H](OC(C3C=C(O)C(O)=C(OC(C4C=C(O)C(O)=C(O)C=4)=O)C=3)=O)[C@@H]2OC(C2C=C(O)C(O)=C(OC(C3C=C(O)C(O)=C(O)C=3)=O)C=2)=O)=O)C=C(O)C=1O)=O.[CH:125]([CH:127]=[CH2:128])=O>S(=O)(=O)(O)O.O>[CH:127]([C:125]1[CH:12]=[CH:4][CH:3]=[CH:8][C:7]=1[CH:6]=[CH2:5])=[CH2:128].[CH2:59]=[CH:57][O:56][CH2:30][CH2:31][O:32][CH2:27][CH2:26][O:25][CH:23]=[CH2:17]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 3

HCID 5234Sodium Chloride2회HCID 7847AcroleinHCID 16129778Tannic Acid

생성물 2

HCID 12998Diethylene glycol divinyl etherHCID 666661,2-Diethenylbenzene수율 81.1%

시약·촉매·용매 2

HCID 1118
Sulfuric Acid
촉매
HCID 962Water용매3회

반응 조건

온도
50 °C

실험 절차

Sodium chloride (116 g), 4 drops concentrated sulfuric acid and 150 g of water are added to a 1-liter flask containing an efficient two-tiered stirrer, condenser, and nitrogen inlet tube. Polyacrylic acid dispersant, such as 5 gm of Primafloc C-7 available from Rohm and Haas Company, is then added to a solution containing a 0.1 g tannic acid dissolved in 136 g of water. This solution is then added to the stirred flask containing sodium chloride. This aqueous phase is then sparged with nitrogen. In a separate flask, 314 mls. of acrolein is sparged for 20 - 30 minutes with nitrogen. In a separate flask a solution of 29.6 g of divinylbenzene (DVB-81.1% active), 6.0 g of diethyleneglycoldivinylether (DEGDVE), and 9.0 g of Percadox 16 (bis-t-butylcyclohexyl percarbonate) is prepared. This latter solution is then added to acrolein, shaken until homogeneous, and added to the aqueous phase in the reaction flask after the stirrer had been turned off and the nitrogen sparge had been converted to a nitrogen atmosphere. A suspension formed in 20 - 30 minutes on intermittent agitation at 145 rpm. The position of the stirrer blade must be at the interfaces of the two liquid phases. After the dispersion is formed, the reaction mixture is heated to 50°C. and held there with intermittent heating and air cooling for 16 hours. The reaction contents are then cooled to room temperature, the liquid drained, and the resin given three water washes. After washing with methanol, the resin is dried at 75°C. for 16 hours.

후처리

  1. additioncontaining an efficient two-tiered stirrer, condenser, and nitrogen inlet tube
  2. additionThis solution is then added to the stirred flask
  3. customThis aqueous phase is then sparged with nitrogen
  4. customof acrolein is sparged for 20 - 30 minutes with nitrogen
  5. additionadded to the aqueous phase in the reaction flask after the stirrer
  6. customthe nitrogen sparge
  7. customA suspension formed in 20 - 30 minutes on intermittent agitation at 145 rpm
  8. customAfter the dispersion is formed
  9. temperaturewith intermittent heating
  10. temperatureair cooling for 16 hours
  11. customThe reaction contents
  12. temperatureare then cooled to room temperature
  13. washAfter washing with methanol
  14. customthe resin is dried at 75°C. for 16 hours

출처 및 근거

ORD 기록
ord-7d9e4892c3484118917e248f15146447
출처 데이터셋
uspto-grants-1976_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US03965070

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트