홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Urea → Phenol-Formaldehyde Urea

HRID 1669639
인쇄

반응식

HRID 1669639 반응식
C=O.[C:3]1([OH:9])[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1.C=O.[NH2:12][C:13]([NH2:15])=[O:14].NC(N)=O>>[CH2:3]=[O:9].[C:3]1([OH:9])[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1.[NH2:12][C:13]([NH2:15])=[O:14]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 3

HCID 1176Urea3회HCID 62705Urea formaldehyde foamHCID 172281Formaldehyde;phenol2회

생성물 1

HCID 21226462Phenol-Formaldehyde Urea

반응 조건

온도
24.5 °C

실험 절차

Samples of phenol-formaldehyde resole (herein referred to as “Comparative Example 3a”) and phenol-formaldehyde resole modified with urea-formaldehyde condensate prepared according to Example 2 (herein referred to as “Example 3b”) were made to premix solutions in the following manner: To each of these solutions, a 50% solids solution of urea was added to give a final ratio of about 37 wt % added urea to about 63 wt % resin solids, for a total of about 240 g of both the Comparative Example 3a resin mix and the Example 3b resin. Each was mixed until the urea dissolved. Each of these solutions was then seeded with a catalytic amount (0.15 g) of isolated tetradimer, and the solutions were slowly agitated at 75-77° F. (24-25° C.) to simulate a customer's mix tank.

후처리

  1. customprepared
  2. additionto premix solutions in the following manner
  3. customto give a final ratio of about 37 wt %
  4. additionfor a total of about 240 g of both the Comparative Example 3a resin mix
  5. dissolutiondissolved

출처 및 근거

ORD 기록
ord-6b671e3d3c714be18d87f07ab6917256
출처 데이터셋
uspto-grants-2011_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07989575B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트