홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Lithium hexamethyldisilazane → HCID 67347606, 화합물

HRID 1676328
노트
인쇄 미리보기

반응식

HRID 1676328 반응식
Cl[C:2]1[N:7]=[CH:6][C:5]([O:8][C:9]2[CH:14]=[CH:13][N:12]=[C:11]3[CH:15]=[C:16]([C:18]4[CH:27]=[CH:26][C:21]([C:22]([NH:24][CH3:25])=[O:23])=[CH:20][CH:19]=4)[S:17][C:10]=23)=[CH:4][CH:3]=1.C[Si]([N-:32][Si](C)(C)C)(C)C.[Li+]>>[NH2:32][C:2]1[N:7]=[CH:6][C:5]([O:8][C:9]2[CH:14]=[CH:13][N:12]=[C:11]3[CH:15]=[C:16]([C:18]4[CH:27]=[CH:26][C:21]([C:22]([NH:24][CH3:25])=[O:23])=[CH:20][CH:19]=4)[S:17][C:10]=23)=[CH:4][CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

3

반응물 2

HCID 2733832Lithium hexamethyldisilazaneHCID 589494324-(7-(6-chloropyridin-3-yloxy)thieno[3,2-b]pyridin-2-yl)-N-methylbenzamide

생성물 1

HCID 67347606HCID 67347606, 화합물수율 14.8%

반응 조건

온도
80 °C

실험 절차

To a stirred mixture of 4-(7-(6-chloropyridin-3-yloxy)thieno[3,2-b]pyridin-2-yl)-N-methylbenzamide (Example 130, Step B, 78 mg, 0.197 mmol), lithium bis(trimethylsilyl)amide (LHMDS, 0.433 mL, 0.433 mmol, 1M in hexanes), and Pd2(dba3) (9.02 mg, 0.00985 mmol), was added P,P-dicyclohexyl(3-(2-N, N-dimethylaminophenyl)-phenyl)phosphine (7.75 mg, 0.0197 mmol). The mixture was sparged with nitrogen for 2 minutes, and then heated to 80° C. for 18 hours. After cooling to room temperature, 2N aqueous HCl (0.5 mL) was added and stirring was continued for 1 hour at room temperature. The mixture was partitioned between dichloromethane (5 mL) and 1:1 saturated aqueous NaHCO3/water (5 mL). The phases were separated, and the aqueous phase was re-extracted with dichloromethane (2×2 mL). The combined organic phases were dried (Na2SO4), filtered, and concentrated. The crude was purified by preparative TLC plate (1 mm thickness, Rf=0.45) eluting with 15% MeOH/CHCl3. The product was obtained as a beige, waxy solid (11 mg, 12%). 1H NMR (400 MHz, 1:1 CDCl3/CD3OD) δ 8.44 (d, J=5 Hz, 1H), 7.84-7.95 (m, 6H), 7.41 (m, 1H), 6.71 (d, J=9 Hz, 1H), 6.63 (d, J=5 Hz, 1H), 2.97 (s, 3H).

후처리

  1. customThe mixture was sparged with nitrogen for 2 minutes
  2. temperatureAfter cooling to room temperature
  3. addition2N aqueous HCl (0.5 mL) was added
  4. customThe mixture was partitioned between dichloromethane (5 mL) and 1:1 saturated aqueous NaHCO3/water (5 mL)
  5. customThe phases were separated
  6. extractionthe aqueous phase was re-extracted with dichloromethane (2×2 mL)
  7. dry with materialThe combined organic phases were dried (Na2SO4)
  8. filtrationfiltered
  9. concentrationconcentrated
  10. customThe crude was purified by preparative TLC plate (1 mm thickness, Rf=0.45)
  11. washeluting with 15% MeOH/CHCl3

출처 및 근거

ORD 기록
ord-8af6619f44be44ebaa66710f6b5a455e
출처 데이터셋
uspto-grants-2011_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08003662B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트