Hydrochloric Acid → 6,6-Dibromopenicillanic acid sulfone

참여 물질

반응 단계

To the dichloromethane solution of 6,6-dibromopenicillanic acid from Preparation J was added 300 ml. of water, followed by the dropwise addition over a period of 30 minutes of 105 ml. of 3 N sodium hydroxide. The pH stabilized at 7.0. The aqueous layer was removed and the organic layer was extracted with water (2×100 ml.). To the combined aqueous solutions was added, at -5° C., a premixed solution prepared from 59.25 g. of potassium permanganate, 18 ml. of concentrated phosphoric acid and 600 ml. of water, until the pink color of the permanganate persisted. The addition took 50 minutes and 500 ml. of oxidant were required. At this point, 500 ml. of ethyl acetate was added and then the pH was lowered to 1.23 by the addition of 105 ml. of 6 N hydrochloric acid. Then 250 ml. of 1 M sodium bisulfite was added during 10-15 minutes at ca. 10° C. During the addition of the sodium bisulfite solution, the pH was maintained at 1.25-1.35 using 6 N hydrochloric acid. The aqueous phase was saturated with sodium chloride and the two phases were separated. The aqueous solution was extracted with additional ethyl acetate (2×150 ml.) and the combined ethyl acetate solutions were washed with brine and dried (MgSO4). This afforded an ethyl acetate solution of 6,6-dibromopenicillanic acid 1,1-dioxide.

출처 및 근거