홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium Cyanide → 3-Bromo-4-fluorobenzoyl cyanide

HRID 1702634
인쇄

반응식

HRID 1702634 반응식
[C-:1]#[N:2].[Na+].[Br:4][C:5]1[CH:6]=[C:7]([CH:11]=[CH:12][C:13]=1[F:14])[C:8](F)=[O:9]>>[F:14][C:13]1[CH:12]=[CH:11][C:7]([C:8]([C:1]#[N:2])=[O:9])=[CH:6][C:5]=1[Br:4]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

3

반응물 2

HCID 8929Sodium CyanideHCID 129227073-Bromo-4-fluorobenzoyl fluoride

생성물 1

HCID 205262423-Bromo-4-fluorobenzoyl cyanide

반응 조건

온도
100 °C

실험 절차

177 g (3.6 moles) of sodium cyanide and 663 g (3 moles) of 3-bromo-4-fluorobenzoyl fluoride were together initially introduced into the reaction vessel and were heated. At about 80° C., an exothermic reaction started, which had to be restrained somewhat by slight cooling. The temperature was allowed to rise to 100° C. and the mixture was stirred at 100° C. for 1 hour. The exothermic reaction continued for about 10 minutes, and additional heat had then to be supplied to the mixture. The mixture was then cooled and the salts were filtered off and destroyed in saturated iron sulphate solution and the filtrate was distilled on a column. 507 g (74% of theory) of a colorless oil with a boiling point of 126° C./20 mm Hg were thus obtained.

후처리

  1. temperaturewere heated
  2. customAt about 80° C., an exothermic reaction
  3. customto rise to 100° C.
  4. customThe exothermic reaction
  5. waitcontinued for about 10 minutes
  6. temperatureadditional heat
  7. temperatureThe mixture was then cooled
  8. filtrationthe salts were filtered off
  9. customdestroyed in saturated iron sulphate solution
  10. distillationthe filtrate was distilled on a column
  11. custom507 g (74% of theory) of a colorless oil with a boiling point of 126° C./20 mm Hg were thus obtained

출처 및 근거

ORD 기록
ord-7229fbf9660844ddba4273664289dd54
출처 데이터셋
uspto-grants-1982_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04348538

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트