[F:1][C:2]([F:19])([F:18])[O:3][C:4]1[CH:17]=[CH:16][C:7]([O:8][C:9]2[CH:15]=[CH:14][C:12](N)=[CH:11][CH:10]=2)=[CH:6][CH:5]=1.OS(O)(=O)=O.N([O-])=O.[Na+].[I-:29].[Na+]>COCCOC.O.CCOC(C)=O>[I:29][C:12]1[CH:14]=[CH:15][C:9]([O:8][C:7]2[CH:16]=[CH:17][C:4]([O:3][C:2]([F:19])([F:18])[F:1])=[CH:5][CH:6]=2)=[CH:10][CH:11]=1In a 300 mL round bottom flask, 6.92 g (25.63 mmol) 4-(4-(trifluoromethoxy)phenoxy)aniline was dissolved in 40 mL DME and cooled to 0° C. in a brine/ice bath. Using a dropping funnel, 10 equivalents aqueous H2SO4 (10N aqueous) were slowly added to the DME solution, immediately creating a salt suspension. The suspension was stirred at 0° C. for 10 minutes. Then, a solution of 1.5 equivalents sodium nitrite (2.65 g, 38.45 mmol) in 20 mL water was dropped slowly into the suspension while keeping the temperature below 5° C. After adding the sodium nitrite, the mixture was stirred at 0° C. for 30 minutes. Then, an aqueous solution of 3 equivalents sodium iodide was dropped slowly into the mixture. LC/MS showed the reaction was complete. The reaction mixture was diluted with 400 mL EtOAc and washed with 700 mL water and then 700 mL 1M sodium bisulfate. The organic layer was dried over sodium sulfate and concentrated under reduced pressure. The residue was then chromatographed by combiflash using a 330 gram silica column and a gradient of EtOAc (15% max) in hexane to provide 6.53 g of 1-iodo-4-(4-(trifluoromethoxy)-phenoxy)benzene (67%, white solid). m/z 380, 1H NMR (CHCl3): 7.67-7.61 (m, 2H), 7.23-7.16 (m, 2H), 7.04-6.97 (m, 2H), 6.81-6.75 (m, 2H).
불러오는 중…
