홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Water → 4-Allyoxystyrene

HRID 1781949
인쇄

반응식

HRID 1781949 반응식
[OH-].[K+].O.[C:4]([O:7][C:8]1[CH:15]=[CH:14][C:11]([CH:12]=[CH2:13])=[CH:10][CH:9]=1)(=O)[CH3:5].[CH2:16](Br)C=C>O1CCOCC1.C1(C)C=CC=CC=1>[CH2:4]([O:7][C:8]1[CH:15]=[CH:14][C:11]([CH:12]=[CH2:13])=[CH:10][CH:9]=1)[CH:5]=[CH2:16]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 962WaterHCID 7841Allyl bromideHCID 14797Potassium HydroxideHCID 758214-Ethenylphenyl acetate

생성물 1

HCID 117688574-Allyoxystyrene

시약·촉매·용매 2

HCID 1140Toluene용매HCID 31275
1,4-Dioxane
용매
2회

반응 조건

온도
5 °C

실험 절차

To a 4-necked, nitrogen swept, 2 liter glass reaction vessel equipped with a mechanical stirrer, double-walled condenser, thermocouple and pressure compensating addition funnel is added 1,4-dioxane (600 mls), potassium hydroxide (112.0 g, 2.00 moles) and water (39 g). The mixture is stirred and cooled to 10° C. at which time 4-acetoxystyrene (162.0 g, 1.00 moles) is added over approximately 5 minutes. The mixture is stirred for a further 1.5 hour and cooled to 5° C. A solution of allylbromide (133.1 g, 1.10 moles) in 1,4-dioxane (50 mls) is added dropwise over 15 minutes and the reaction mixture is stirred for a further 1.5 hours, while the temperature is maintained between 5° and 10° C. The stirred mixture is gradually heated to 60° C. Heating and stirring are continued at this temperature for a further 2.5 hours. On cooling the mixture is filtered and most of the solvent is removed under reduced pressure. The residue obtained is dissolved in toluene (300 mls) and the solution washed with 4×300 ml portions of water, dried over sodium sulfate and the solvent distilled under reduced pressure to yield crude 4-allyloxystyrene in high yield.

후처리

  1. customequipped with a mechanical stirrer, double-walled condenser
  2. additionthermocouple and pressure compensating addition funnel
  3. additionis added over approximately 5 minutes
  4. stirringThe mixture is stirred for a further 1.5 hour
  5. stirringthe reaction mixture is stirred for a further 1.5 hours, while the temperature
  6. temperatureis maintained between 5° and 10° C
  7. temperatureThe stirred mixture is gradually heated to 60° C
  8. temperatureHeating
  9. stirringstirring
  10. temperatureOn cooling the mixture
  11. filtrationis filtered and most of the solvent
  12. customis removed under reduced pressure
  13. customThe residue obtained
  14. washthe solution washed with 4×300 ml portions of water
  15. dry with materialdried over sodium sulfate
  16. distillationthe solvent distilled under reduced pressure

출처 및 근거

ORD 기록
ord-63cf88ed289a47f680735419176263a5
출처 데이터셋
uspto-grants-1997_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05633411

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트