홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ethylene Glycol → 5-(1,3-Dioxolan-2-YL)-2-fluoropyridine

HRID 1811820
인쇄

반응식

HRID 1811820 반응식
[F:1][C:2]1[CH:9]=[CH:8][C:5]([CH:6]=[O:7])=[CH:4][N:3]=1.[CH2:10](O)[CH2:11][OH:12].C1(C)C=CC(S(O)(=O)=O)=CC=1>C1(C)C=CC=CC=1.C(=O)(O)[O-].[Na+].O.CCOC(C)=O>[O:7]1[CH2:10][CH2:11][O:12][CH:6]1[C:5]1[CH:8]=[CH:9][C:2]([F:1])=[N:3][CH:4]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 3

HCID 174Ethylene GlycolHCID 6101p-Toluenesulfonic acidHCID 164142462-Fluoro-5-formylpyridine

생성물 1

HCID 601557925-(1,3-Dioxolan-2-YL)-2-fluoropyridine수율 94%

시약·촉매·용매 4

HCID 962Water용매HCID 1140Toluene용매
HCID 8857
Ethyl Acetate
용매
HCID 516892Sodium Bicarbonate용매

반응 조건

온도
120 °C

실험 절차

6-Fluoronicotinaldehyde (Asymchem Laboratories, Inc., Morrisville, N.C., 3.035 g, 24.26 mmol) was suspended in toluene (80 mL) and ethylene glycol (1.40 mL, 25.1 mmol) and p-toluenesulfonic acid (Acros Organics, Geel, Belgium, 12% in acetic acid, 0.15 mL) was added. The flask was fitted with a reflux condenser and placed in a preheated oil bath (120° C.) and stirred under nitrogen for 20 minutes. At this time, the reflux condenser was replaced with a Dean-Stark trap, and stirring was continued at 120° C. for 25 minutes. Then, the reaction was cooled and diluted with saturated sodium bicarbonate solution (20 mL) (before it had cooled to room temperature). The reaction was then diluted with water (20 mL) and EtOAc (30 mL). The layers were separated, and the aqueous phase was extracted with EtOAc. The organic extracts were combined, dried over sodium sulfate, filtered, concentrated, and purified on a silica gel filter (about 3 inches, 40:1 DCM/MeOH to 30:1 DCM/MeOH) to afford 5-(1,3-dioxolan-2-yl)-2-fluoropyridine (3.858 g), which was taken on to the next step. MS (ESI pos. ion) m/z 170 (M+H)+.

후처리

  1. customThe flask was fitted with a reflux condenser
  2. customplaced in a preheated oil bath
  3. stirringstirring
  4. waitwas continued at 120° C. for 25 minutes
  5. temperatureThen, the reaction was cooled
  6. customThe layers were separated
  7. extractionthe aqueous phase was extracted with EtOAc
  8. dry with materialdried over sodium sulfate
  9. filtrationfiltered
  10. concentrationconcentrated
  11. custompurified on a silica gel
  12. filtrationfilter (about 3 inches, 40:1 DCM/MeOH to 30:1 DCM/MeOH)

출처 및 근거

ORD 기록
ord-a3c9c18067484cc596e5df2ac0185fe6
출처 데이터셋
uspto-grants-2013_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08362241B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트