홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium Carbonate → Hexafluoroacetone monohydrate

HRID 1818091
인쇄

반응식

HRID 1818091 반응식
[F:1][C:2]([F:13])([F:12])[C:3]([C:8]([F:11])([F:10])[F:9])([OH:7])C([O-])=[O:5].[Na+].C(=O)([O-])[O-].[Na+].[Na+].ClCl>O>[OH2:5].[F:1][C:2]([F:13])([F:12])[C:3]([C:8]([F:11])([F:10])[F:9])=[O:7]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 10340Sodium Carbonate2회HCID 24526Chlorine2회HCID 86623973Sodium 3,3,3-trifluoro-2-hydroxy-2-trifluoromethylpropionate

생성물 1

HCID 61525Hexafluoroacetone monohydrate

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
40 °C

실험 절차

In a 50-ml three-necked flask were placed 20 mmol of the aqueous sodium 3,3,3-trifluoro-2-trifluoromethyl-2-hydroxypropionate solution prepared in Reference Example 2 and 2.12 g (20 mmol) of sodium carbonate. 20 g of water was added to dissolve the mixture. The pH was 9.8. A reaction was performed by blowing chlorine gas at 20 ml/min for 29 minutes (24.1 mmol, 1.2 eq.) while stirring the solution under heat at 40° C. in a water bath. The pH during this treatment was 6.9. To this solution, 1.06 g (10 mmol) of sodium carbonate was further added, followed by dissolving. The pH was 9.1. The reaction was further performed by blowing chlorine gas at 10 ml/min for 22 minutes (9.2 mmol, 0.46 eq.) while stirring the solution under heat at 40° C. The pH when the reaction was complete was 6.8. Hexafluoroacetone hydrate was obtained at a starting material conversion of 82% with a selectivity of at least 99%.

후처리

  1. customIn a 50-ml three-necked flask were placed
  2. dissolutionto dissolve the mixture
  3. customfor 29 minutes
  4. dissolutionby dissolving
  5. customfor 22 minutes
  6. stirringwhile stirring the solution
  7. temperatureunder heat at 40° C

출처 및 근거

ORD 기록
ord-7a042f50883d4683a301d16256fa33e0
출처 데이터셋
uspto-grants-2009_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07598425B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트