홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Acetic Acid → [7-(2,4-Dichlorophenyl)-2-ethylpyrazolo[1,5-a]pyridin-3-yl]amine

HRID 1864999
인쇄

반응식

HRID 1864999 반응식
[Cl:1][C:2]1[CH:7]=[C:6]([Cl:8])[CH:5]=[CH:4][C:3]=1[C:9]1[N:14]2[N:15]=[C:16]([CH2:21][CH3:22])[C:17]([N+:18]([O-])=O)=[C:13]2[CH:12]=[CH:11][CH:10]=1.O.C(O)(=O)C>C(O)C.[Zn]>[Cl:1][C:2]1[CH:7]=[C:6]([Cl:8])[CH:5]=[CH:4][C:3]=1[C:9]1[N:14]2[N:15]=[C:16]([CH2:21][CH3:22])[C:17]([NH2:18])=[C:13]2[CH:12]=[CH:11][CH:10]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 176Acetic AcidHCID 962WaterHCID 219846667-(2,4-Dichlorophenyl)-2-ethyl-3-nitropyrazolo[1,5-a]pyridine

생성물 1

HCID 21984628[7-(2,4-Dichlorophenyl)-2-ethylpyrazolo[1,5-a]pyridin-3-yl]amine수율 89.8%

시약·촉매·용매 2

HCID 23994Zinc촉매HCID 702
Ethanol
용매

반응 조건

온도
60 °C

실험 절차

7-(2,4-Dichlorophenyl)-2-ethyl-3-nitropyrazolo[1,5-a]pyridine (110 mg) was suspended in ethanol (6 mL), and then water (3 mL), acetic acid (1 mL) and zinc powder (220 mg) were added and the mixture was heated and stirred at 60° C. for 1 hour. The reaction mixture was filtered, water was added to the filtrate, extraction was performed with ethyl acetate and the extract washed with saturated aqueous sodium hydrogencarbonate and brine. After drying over anhydrous magnesium sulfate and filtration, the solvent was concentrated under reduced pressure to obtain [7-(2,4-dichlorophenyl)-2-ethylpyrazolo[1,5-a]pyridin-3-yl]amine (90 mg) as crude crystals. These were dissolved in tetrahydrofuran (1 mL), and after adding propionaldehyde (0.059 mL) and 3 M aqueous sulfuric acid (0.294 mL), sodium borohydride (22.2 mg) was added in five portions while vigorously stirring on ice, and stirring was continued for 30 minutes. Water was added to the reaction mixture, extraction was performed with diethyl ether and the extract washed with saturated sodium hydrogencarbonate and brine. After drying over anhydrous magnesium sulfate and filtration, the solvent was concentrated under reduced pressure, the residue was purified by silica gel column chromatography, and the title compound (59 mg) was obtained from the n-hexane:ethyl acetate (100:1) fraction as a yellow oil.

후처리

  1. temperaturethe mixture was heated
  2. filtrationThe reaction mixture was filtered
  3. additionwater was added to the filtrate, extraction
  4. washthe extract washed with saturated aqueous sodium hydrogencarbonate and brine
  5. dry with materialAfter drying over anhydrous magnesium sulfate and filtration
  6. concentrationthe solvent was concentrated under reduced pressure

출처 및 근거

ORD 기록
ord-9682ba4c59634075bb64587c0b887143
출처 데이터셋
uspto-grants-2009_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07625925B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트