홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

N-methyl-2-pyrrolidone → HCID 66615669, 화합물

HRID 1878791
노트
인쇄 미리보기

반응식

HRID 1878791 반응식
[OH:1][CH:2]1[CH2:7][CH2:6][NH:5][CH2:4][CH2:3]1.CC(C)([O-])C.[K+].CN1CCCC1=O.[Cl:21][C:22]1[CH:27]=[CH:26][C:25](F)=[C:24]([CH3:29])[C:23]=1[Cl:30]>O1CCCC1.O>[ClH:21].[Cl:30][C:23]1[C:24]([CH3:29])=[C:25]([CH:26]=[CH:27][C:22]=1[Cl:21])[O:1][CH:2]1[CH2:7][CH2:6][NH:5][CH2:4][CH2:3]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 13387N-methyl-2-pyrrolidoneHCID 79341Piperidin-4-olHCID 116869983,4-Dichloro-2-methylfluorobenzeneHCID 23665647Potassium tert-butoxide

생성물 1

HCID 66615669HCID 66615669, 화합물수율 150.4%

시약·촉매·용매 2

HCID 962Water용매
HCID 8028
Tetrahydrofuran
용매
3회

반응 조건

온도
67 °C

실험 절차

4-Hydroxypiperidine (32.5 g) and potassium tert-butoxide (62.7 g) were added to a 1 L jacketed vessel. Tetrahydrofuran (275 mL) was added followed by N-methylpyrrolidone (25 mL). 1,2-Dichloro-4-fluoro-3-methylbenzene (50 g) in tetrahydrofuran (100 mL) was then added, followed by tetrahydrofuran (100 mL). The mixture was heated to 67° C. overnight then cooled to 50° C. Water (250 mL) was added and the mixture was stirred for 10 min at 50° C. The layers were separated and the heating was removed. The organic layer was washed with twice with 10% w/w brine (250 mL). The organic layer was heated to remove solvent by distillation firstly at atmospheric pressure and then under vacuum (400 mbar) whilst isopropanol (950 mL) was added until the tetrahydrofuran was replaced by isopropanol. The solution was then heated to 50° C. Hydrogen chloride in isopropanol (5.5M, 125 mL) was added, an exotherm to 60° C. was observed and the solution was cooled to 50° C. The mixture was cooled from 50° C. to 10° C. over 1 h and then stirred overnight at 10° C. The product was collected by filtration, washed with isopropanol (50 mL) and dried under vacuum at 40° C. to give 4-(3,4-dichloro-2-methyl-phenoxy)-piperidine hydrochloride as an off-white solid (62.3 g).

후처리

  1. temperaturethen cooled to 50° C
  2. customThe layers were separated
  3. customthe heating was removed
  4. washThe organic layer was washed with twice with 10% w/w brine (250 mL)
  5. temperatureThe organic layer was heated
  6. customto remove solvent
  7. distillationby distillation firstly at atmospheric pressure
  8. additionunder vacuum (400 mbar) whilst isopropanol (950 mL) was added until the tetrahydrofuran
  9. temperatureThe solution was then heated to 50° C
  10. additionHydrogen chloride in isopropanol (5.5M, 125 mL) was added
  11. customto 60° C.
  12. temperaturethe solution was cooled to 50° C
  13. temperatureThe mixture was cooled from 50° C. to 10° C. over 1 h
  14. stirringstirred overnight at 10° C
  15. filtrationThe product was collected by filtration
  16. washwashed with isopropanol (50 mL)
  17. customdried under vacuum at 40° C.

출처 및 근거

ORD 기록
ord-b3a7a86333f8402c806c7632a1bdd947
출처 데이터셋
uspto-grants-2012_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08314127B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트