홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Potassium Carbonate → 4-Phenylthioanisole

HRID 1884198
인쇄

반응식

HRID 1884198 반응식
Br[C:2]1[CH:7]=[CH:6][C:5]([S:8][CH3:9])=[CH:4][CH:3]=1.[C:10]1(B(O)O)[CH:15]=[CH:14][CH:13]=[CH:12][CH:11]=1.C([O-])([O-])=O.[K+].[K+]>COCCOC.O>[C:10]1([C:2]2[CH:7]=[CH:6][C:5]([S:8][CH3:9])=[CH:4][CH:3]=2)[CH:15]=[CH:14][CH:13]=[CH:12][CH:11]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 11430Potassium CarbonateHCID 660374-BromothioanisoleHCID 66827Phenylboronic Acid

생성물 1

HCID 110198974-Phenylthioanisole수율 95%

시약·촉매·용매 2

HCID 962Water용매HCID 80711,2-Dimethoxyethane용매

실험 절차

A 100 mL of reactor equipped with magnetic stir bar was charged with 140 mg (0.15 mmol) of {[(t-Bu)2P(OH)]2PdCl}2 (from Experiment 7), 2.03 g (10.0 mmol) of 4-bromothioanisole, 1.83 g (15.0 mmol) of PhB(OH)2 and 4.16 g (30.0 mmol) of K2CO3 in 13 mL of DME and 7 mL of H2O. The reaction mixture was refluxed for 12 h until the starting material was completely consumed as judged by TLC. The reaction was cooled to room temperature, transferred to a separatory funnel, and diluted with 300 mL of hexane and 100 mL of H2O. The layers were separated, and organic layer was washed with H2O (2×100 mL), brine (100 mL), and dried over mgSO4, filtered, and solvents removed from the filtrate by rotary evaporation. The resulting residue was chromatographed on silicon gel using hexane as eluant. The eluate was concentrated by rotary evaporation followed by high vacuum to give 1.90 g (95% yield) of 4-phenylthioanisole. It was >95% pure by 1H NMR and GC/MS. 1H NMR (300 MHz, CDCl3): δ7.47-7.39 (m, 5H), 7.31 (m, 2H), 7.22 (m, 2H), 2.39 (s, 3H) ppm. 13C NMR (75 MHz, CDCl3): δ140.5, 138.0, 137.6, 128.8, 127.4, 127.1, 126.9, 126.8 ppm.

후처리

  1. customA 100 mL of reactor equipped with magnetic stir bar
  2. temperatureThe reaction mixture was refluxed for 12 h until the starting material
  3. customwas completely consumed
  4. customtransferred to a separatory funnel
  5. additiondiluted with 300 mL of hexane and 100 mL of H2O
  6. customThe layers were separated
  7. washorganic layer was washed with H2O (2×100 mL), brine (100 mL)
  8. customdried over mgSO4
  9. filtrationfiltered
  10. customsolvents removed from the filtrate by rotary evaporation
  11. customThe resulting residue was chromatographed on silicon gel
  12. concentrationThe eluate was concentrated by rotary evaporation

출처 및 근거

ORD 기록
ord-b02a185cd2fb4d538ce34af4df380d99
출처 데이터셋
uspto-grants-2004_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06762330B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트