홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Toluene → Ethylene/Propylene 1,3-Butadiene

HRID 1931065
인쇄

반응식

HRID 1931065 반응식
[C:1]1(C)[CH:6]=CC=[CH:3][CH:2]=1.C(O[CH2:12][CH2:13][CH3:14])(=O)C.C[Sn](C)(C)C.C=C>[W](Cl)(Cl)(Cl)(Cl)(Cl)Cl.CO>[CH2:1]=[CH2:2].[CH2:12]=[CH:13][CH3:14].[CH2:6]=[CH:1][CH:2]=[CH2:3]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 1140Toluene2회HCID 6325EthyleneHCID 7997Propyl AcetateHCID 11661Tetramethyltin

생성물 1

HCID 19841757Ethylene/Propylene 1,3-Butadiene

시약·촉매·용매 2

HCID 83301Tungsten hexachloride촉매
HCID 887
Methanol
용매

반응 조건

온도
80 °C

실험 절차

Next, 5 g of the obtained polyolefin copolymer and 750 mL of dried toluene were charged into a 2000-mL SUS autoclave thoroughly purged with a nitrogen gas, and then, after the inner temperature of the autoclave was raised to 80° C., the mixture was agitated for 2 hours to dissolve the polyolefin copolymer. Thereafter, the inside of the polymerization vessel was pressurized to 0.8 MPa with ethylene. Then, a toluene solution containing 0.75 mmol of tungsten hexachloride, 7.5 mmol of propyl acetate, and 1.5 mmol of tetramethyl tin was charged into the autoclave, and the reaction was carried out for 60 minutes while maintaining the ethylene pressure at 0.8 MPa and the inner temperature at 80° C. Thereafter, 20 mL of methanol was added to terminate the reaction. After depressurized, the obtained reaction solution was passed through a column packed with 100 g of silica gel, and then the polymer was recovered from the reaction solution by precipitation in 4 L of methanol, and dried at 130° C. for 12 hours under vacuum. The yield of the obtained polyolefin polymer containing vinyl groups at both ends thereof was 3.9 g. In the composition of the polymer, the content of ethylene was 79.8% by mole, the content of propylene was 16.6% by mole, and the content of 1,3-butadiene was 3.6% by mole. The content of 1,3-butadiene contained 0.6% by mole of 1,4-addition structure, 0.5% by mole of 1,2-addition structure, 2.3% by mole of 5-membered ring structure, and 0.2% by mole of 3-membered ring structure. The terminal vinylation ratio of the polymer was 77%, and the intrinsic viscosity [η] was 0.12 dL/g.

후처리

  1. customthoroughly purged with a nitrogen gas
  2. dissolutionto dissolve the polyolefin copolymer
  3. additionwas charged into the autoclave
  4. waitthe reaction was carried out for 60 minutes
  5. customat 80° C
  6. customto terminate
  7. customthe reaction
  8. customthe obtained reaction solution
  9. customthe polymer was recovered from the reaction solution by precipitation in 4 L of methanol
  10. customdried at 130° C. for 12 hours under vacuum
  11. additionThe yield of the obtained polyolefin polymer containing vinyl groups at both ends

출처 및 근거

ORD 기록
ord-6c77c9beba874afd95cbf0a5ef4acd37
출처 데이터셋
uspto-grants-2012_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08188191B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트