홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Sodium Carbonate → Sevelamer carbonate

HRID 1943531
노트
인쇄 미리보기

반응식

HRID 1943531 반응식
[C:1](=[O:4])([O-:3])[O-:2].[Na+].[Na+].[CH2:7]=[CH:8][CH2:9][NH2:10].[CH2:11]1[O:13][CH:12]1[CH2:14][Cl:15].Cl>O>[CH2:7]=[CH:8][CH2:9][NH3+:10].[CH2:11]1[O:13][CH:12]1[CH2:14][Cl:15].[C:1]([O-:4])([OH:3])=[O:2]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 10340Sodium CarbonateHCID 1592472-(Chloromethyl)oxirane;prop-2-en-1-amine;hydrochloride

생성물 1

HCID 49800084Sevelamer carbonate수율 63.7%

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
32.5 °C

실험 절차

A 5 L reactor, equipped with a mechanical stirrer, temperature probe, dropping funnel and a condenser topped with a nitrogen inlet, was charged with water (4 L), sodium carbonate (250 g), and the solution was brought at 35° C. Sevelamer hydrochloride (400 g) are added portion wise for 1 h, in portions of 20 g each, while stirring, maintaining the temperature from 30 to 35° C. The solid is then filtered and suspended in water (3 L), at 30-35° C. The mixture is allowed to stir for 20 minutes. The solid was filtered again and rinsed with water until disappearance of chloride ions. The product is dried under reduced pressure at 70° C. to afford Sevelamer carbonate (290 g), with a phosphate binding capacity of 17.2-17.6 mEq/g.

후처리

  1. customA 5 L reactor, equipped with a mechanical stirrer
  2. customtopped with a nitrogen inlet
  3. customwas brought at 35° C
  4. filtrationThe solid is then filtered
  5. customsuspended in water (3 L), at 30-35° C
  6. stirringto stir for 20 minutes
  7. filtrationThe solid was filtered again
  8. washrinsed with water until disappearance of chloride ions
  9. customThe product is dried under reduced pressure at 70° C.

출처 및 근거

ORD 기록
ord-3fcc64fbcf634f199265b60279a47a19
출처 데이터셋
uspto-grants-2013_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08394416B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트