홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Diisopropylamine → 2-(Pent-1-ynyl)pyridine

HRID 1951940
인쇄

반응식

HRID 1951940 반응식
I[C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][N:3]=1.C(NC(C)C)(C)C.[CH:15]#[C:16][CH2:17][CH2:18][CH3:19]>CN(C)C=O.C(OCC)(=O)C.Cl[Pd](Cl)([P](C1C=CC=CC=1)(C1C=CC=CC=1)C1C=CC=CC=1)[P](C1C=CC=CC=1)(C1C=CC=CC=1)C1C=CC=CC=1.[Cu]I>[C:15]([C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][N:3]=1)#[C:16][CH2:17][CH2:18][CH3:19]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 3

HCID 7912DiisopropylamineHCID 123091-PentyneHCID 2211262-Iodopyridine

생성물 1

HCID 110947572-(Pent-1-ynyl)pyridine수율 88.3%

시약·촉매·용매 4

HCID 24350Copper(1+) iodide; Copper(I) iodide; Cuprous iodide; Cuprous iodide (CuI)촉매
HCID 178418476
HCID 178418476, 화합물
촉매
HCID 6228Dimethylformamide용매
HCID 8857Ethyl Acetate용매

반응 조건

온도
85 °C

실험 절차

To a degassed solution of 2-iodopyridine (0.519 mL, 4.88 mmol), bis(triphenylphosphine)palladium(II) chloride (0.205 g, 0.293 mmol), copper(I) iodide (0.046 g, 0.244 mmol), and diisopropylamine (2.78 mL, 19.5 mmol) in N,N-dimethylformamide (20 mL) was added 1-pentyne (0.721 mL, 7.32 mmol). The reaction was heated to 85° C. for 3 hrs. The reaction mixture was cooled to room temperature, diluted with ethyl acetate (150 mL), washed with a 10% aqueous solution of lithium chloride (2×100 mL), washed with a 2M aqueous solution of ammonium hydroxide (100 mL), washed with brine (100 mL), and dried over anhydrous sodium sulfate. Concentration followed by purification by silica gel chromatography with hexanes/ethyl acetate (3/2) afforded 2-(pent-1-ynyl)pyridine (636 mg, 4.31 mmol). The compound had an HPLC retention time=0.982 min.—Column: YMC S5 COMBISCREEN® 4.6×50 mm; Gradient time: 4 min; Flow rate=4 ml/min; Solvent A=10% MeOH—90% Water—0.2% H3PO4; Solvent B=90% MeOH—10% water—0.2% H3PO4; Start % B=0; Final % B=100. LC-MS: M+1=146.3. 1H NMR (400 MHz, CDCl3) δ ppm 1.06 (t, 3H), 1.67 (dt, J=7.23 Hz, 2H), 2.43 (t, J=7.15 Hz, 2H), 7.18 (ddd, J=7.65, 4.89, 1.00 Hz, 1H), 7.38 (d, J=7.78 Hz, 1H), 7.62 (td, J=7.72, 1.88 Hz, 1H), and 8.55 (d, J=4.27 Hz, 1H).

후처리

  1. temperatureThe reaction mixture was cooled to room temperature
  2. washwashed with a 10% aqueous solution of lithium chloride (2×100 mL)
  3. washwashed with a 2M aqueous solution of ammonium hydroxide (100 mL)
  4. washwashed with brine (100 mL)
  5. dry with materialdried over anhydrous sodium sulfate
  6. concentrationConcentration
  7. customfollowed by purification by silica gel chromatography with hexanes/ethyl acetate (3/2)

출처 및 근거

ORD 기록
ord-6633a99ef664412c8d776a96ea05bda4
출처 데이터셋
uspto-grants-2013_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08404672B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트