홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.2
  1. 홈
  2. /반응

Nitric Acid → 4-Nitroanisole

HRID 1956033
인쇄

반응식

HRID 1956033 반응식
[C:1]([C:5]1[CH:10]=[CH:9][C:8]([O:11][CH3:12])=[CH:7][CH:6]=1)([CH3:4])([CH3:3])[CH3:2].[N+:13]([O-:16])([OH:15])=[O:14]>C(Cl)CCl>[N+:13]([C:5]1[CH:10]=[CH:9][C:8]([O:11][CH3:12])=[CH:7][CH:6]=1)([O-:15])=[O:14].[N+:13]([C:9]1[CH:10]=[C:5]([C:1]([CH3:2])([CH3:4])[CH3:3])[CH:6]=[CH:7][C:8]=1[O:11][CH3:12])([O-:16])=[O:14]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 2

HCID 944Nitric AcidHCID 94750p-tert-Butylanisole

생성물 2

HCID 74854-Nitroanisole수율 96.4%HCID 41784474-Tert-butyl-1-methoxy-2-nitrobenzene수율 72.5%

시약·촉매·용매 1

HCID 111,2-Dichloroethane용매

반응 조건

온도
23 °C

실험 절차

A solution of 8.2 g (50 mmole) of 4-tertbutylanisole in 15 ml of ethylene dichloride was placed in a 40 ml two necked round-bottomed flask equipped with a thermometer, a dropping funnel and magnetic stirring bar. The flask was placed in an ice-water bath and the contents were stirred and cooled. When the temperature reached +4° C., 4.72 g (3.32 ml, 52.4 mmol) of 70% nitric acid was added at such a rate that the temperature of the reaction mixture remained below 10° C. The completion of the acid addition took 15 minutes. Then the reaction mixture was stirred for 15 minutes while the flask was still immersed in the ice-water bath. After this time the reaction mixture was allowed to warm-up to 23° C. and left for 3 more hours with stirring to complete the nitration. The stirring was then stopped and the lower (organic) layer was collected. From this solution ethylene dichloride is removed by rotary evaporation at 40° C. under 20 mmHg and an oily residue was subjected to vacuum distillation. A 6" Vigreux column and a pressure of 1 mmHg was applied. These conditions afforded separation of the 4-nitroanisole bp 86° C. from 2-nitro-4-tertbutylanisole bp 102°-105° C. It resulted in the collection of 7.576 g of 99.1% pure 2-nitro-4-tertbutylanisole and 2.116 g of 96.4% pure 4-nitroanisole, mp 54° C. wth a total yield of 72.5% of 2-nitro-4-tertbutylanisole.

후처리

  1. customequipped with a thermometer, a dropping funnel and magnetic stirring bar
  2. customThe flask was placed in an ice-water bath
  3. temperaturecooled
  4. customreached +4° C.
  5. customremained below 10° C
  6. additionThe completion of the acid addition
  7. stirringThen the reaction mixture was stirred for 15 minutes while the flask
  8. waitleft for 3 more hours
  9. stirringwith stirring
  10. customthe lower (organic) layer was collected
  11. customFrom this solution ethylene dichloride is removed by rotary evaporation at 40° C. under 20 mmHg
  12. distillationan oily residue was subjected to vacuum distillation
  13. customThese conditions afforded
  14. customseparation of the 4-nitroanisole bp 86° C. from 2-nitro-4-tertbutylanisole bp 102°-105° C

출처 및 근거

ORD 기록
ord-e47ac8688aa841ee942cec08fab220aa
출처 데이터셋
uspto-grants-1998_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05777168

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트