Methane → (2R)-1-[3-(2-{[2-(2-dimethylaminoethoxy)-3-pyridinyl]oxy}ethoxy)-2-pyrazinyl]-2-methylpiperazine

HRID 1958292노트

반응식

HRID 1958292 반응식
Cl[C:2]1[C:3]([N:8]2[CH2:13][CH2:12][NH:11][CH2:10][C@H:9]2[CH3:14])=[N:4][CH:5]=[CH:6][N:7]=1.C.[CH3:16][N:17]([CH3:31])[CH2:18][CH2:19][O:20][C:21]1[C:26]([O:27][CH2:28][CH2:29][OH:30])=[CH:25][CH:24]=[CH:23][N:22]=1.C1COCC1.CC(C)([O-])C.[K+]>C1(C)C=CC=CC=1>[CH3:16][N:17]([CH3:31])[CH2:18][CH2:19][O:20][C:21]1[C:26]([O:27][CH2:28][CH2:29][O:30][C:2]2[C:3]([N:8]3[CH2:13][CH2:12][NH:11][CH2:10][C@H:9]3[CH3:14])=[N:4][CH:5]=[CH:6][N:7]=2)=[CH:25][CH:24]=[CH:23][N:22]=1

참가 물질

6

반응물 4

HCID 297MethaneHCID 9992195(R)-2-Chloro-3-(2-methylpiperazin-1-YL)pyrazineHCID 117083962-{[2-(2-Dimethylaminoethoxy)-3-pyridinyl]oxy}ethanolHCID 66863523KOtBu THF

생성물 1

HCID 9870582(2R)-1-[3-(2-{[2-(2-dimethylaminoethoxy)-3-pyridinyl]oxy}ethoxy)-2-pyrazinyl]-2-methylpiperazine

시약·촉매·용매 1

HCID 1140Toluene용매

반응 조건

온도
100 °C

실험 절차

(2R)-1-(3-chloro-2-pyrazinyl)-2-methylpiperazine (20 L in toluene solution; see Example 8 for preparation) and active charcoal (201 g) was added to the 328 L-reactor containing 2-{[2-(2-dimethylaminoethoxy)-3-pyridinyl]oxy}ethanol (Example 1C) in toluene solution. The mixture was stirred for 25 minutes before transferred to a through a GAF-filter (containing a Teflon filter bag) to a 250 L-stainless steel reactor. The mixture was heated to 100° C. before the prepared “THF/potassium tert-butoxide—solution” was added to the reactor using a 50 L addition bowl. After 10 L “THF/potassium tert-butoxide—solution” was added, an IP-HPLC was taken to ensure that the title compound had started to form. The total addition of THF/potassium tert-butoxide-solution was made during 2 h and 15 minutes. Water (21 L) and sodium chloride (1 kg) was added to a 198 L-glasslined reactor. The salt was dissolved before the reaction mixture was transferred from the 328 L-reactor and quenched into the 198 L-reactor. Toluene (10 L) was also transferred to make sure that no reaction-mixture was left in the hoses used for the transfer. The mixture was then heated to 70° C. before the mechanical stirrer was turned off. The phases were allowed to separate for 30 minutes before the water phase (25 L) was discharged. The mixture was heated to reflux and toluene (10 L) was distilled off. Water (100 L) was added and the mixture was heated to reflux again and 60 L of water was distilled off. The remaining solution was then cooled to RT. The title compound was never isolated; it was directly used in the next step (Example 3C).

후처리

  1. filtrationfilter bag) to a 250 L-stainless steel reactor
  2. customprepared “THF/potassium tert-butoxide—solution”
  3. additionwas added to the reactor
  4. additiona 50 L addition bowl

출처 및 근거

ORD 기록
ord-6ab80335e3b94aad82e2f3fc014f7147
출처 데이터셋
uspto-grants-2013_04
특허 번호
US08410113B2

반응 노트

불러오는 중…