[Br:1][C:2]1[C:3]([F:16])=[C:4]([C:9]([CH3:15])=[C:10]([N+:12]([O-])=O)[CH:11]=1)[C:5]([O:7][CH3:8])=[O:6].[Cl-].[NH4+].O>CO.[Fe]>[NH2:12][C:10]1[C:9]([CH3:15])=[C:4]([C:3]([F:16])=[C:2]([Br:1])[CH:11]=1)[C:5]([O:7][CH3:8])=[O:6]To a solution of methyl 3-bromo-2-fluoro-6-methyl-5-nitrobenzoate (2.43 g, 8.32 mmol) in Methanol (80 ml) at room temperature was added ammonium chloride (4.37 g, 83.2 mmol) followed by deionized Water (40 ml). The mixture was heated to 70° C. in air before the addition of iron (2.79 g, 49.92 mmol). The reaction turned brown over the 2.5 hours it was stirred at 70° C. This mixture was allowed to cool to room temperature and was filtered through Kieselgel. The filter pad was washed with MeOH (80 ml) and the filtrate concentrated under reduced pressure. The residue was dissolved in saturated NaHCO3(aq) (50 ml) and EtOAc (150 ml). The phases were separated and the organic phase was washed with saturated NaHCO3(aq) (50 ml) before being dried over MgSO4, filtered and concentrated under reduced pressure. The residue was purified by FCC (50 g silica, Isolute cartridge, gradient of eluents; 95:5 Heptane:EtOAc to 7:3 Heptane:EtOAc) to give 2.23 g (95%, 77% corrected yields) of methyl 3-amino-5-bromo-6-fluoro-2-methylbenzoate as a yellow oil. The material was taken through the next step without further purification. LC-MS 81%, 1.87 min (3 minute LC-MS method), m/z=261.9/263.9, 1H NMR (500 MHz, Chloroform-d) δ ppm 6.89 (d, J=6.0 Hz, 1H), 3.94 (s, 3H), 3.60 (s, 2H), 2.08 (s, 3H).
불러오는 중…
