홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Carbon Dioxide → N-(4-Hydroxybutyl)-4-ethoxybenzamide

HRID 1986925
노트
인쇄 미리보기

반응식

HRID 1986925 반응식
[CH2:1]([O:3][C:4]1[CH:12]=[CH:11][C:7]([C:8]([OH:10])=O)=[CH:6][CH:5]=1)[CH3:2].C(N1C=CN=C1)(N1C=CN=C1)=O.C(=O)=O.[NH2:28][CH2:29][CH2:30][CH2:31][CH2:32][OH:33]>C1COCC1>[OH:33][CH2:32][CH2:31][CH2:30][CH2:29][NH:28][C:8](=[O:10])[C:7]1[CH:6]=[CH:5][C:4]([O:3][CH2:1][CH3:2])=[CH:12][CH:11]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 280Carbon DioxideHCID 120934-Ethoxybenzoic acidHCID 258684-Amino-1-butanolHCID 682631,1'-Carbonyldiimidazole

생성물 1

HCID 23136820N-(4-Hydroxybutyl)-4-ethoxybenzamide수율 87.7%

시약·촉매·용매 1

HCID 8028Tetrahydrofuran용매2회

반응 조건

온도
-5 °C

실험 절차

A 22-L, 3-necked, round-bottom flask equipped with a mechanical stirrer, nitrogen bubbler, and a thermocouple probe, was charged with 1.16 kg of 4-ethoxybenzoic acid and 11 L of THF. A total of 1.403 kg (8.65 mole, 1.24 eq) of 1,1′-carbonyldiimidazole was added at ambient temperature in 4 portions (to control CO2 evolution) to attain a conversion of 98% to the activated acid. After the yellow solution was cooled to −5° C., a solution prepared from 684.5 g (7.68 mole, 1.10 eq) of 4-amino-1-butanol in 0.5 L of THF was added over a period of 50 min while maintaining a temperature of −7 to −3° C. The gummy mixture was allowed to warm to room temperature and stir overnight. The light-yellow solution was concentrated (45° C., 50 mbar) to 3.22 kg of an orange oil that was charged to an extractor along with 5.7 kg of 10% HCl and 6 L DCM. The aqueous phase was extracted with 3 L DCM. The DCM extracts were combined, washed with 5 L of 0.5 N HCl, washed with 5 L of saturated aq. NaHCO3, dried (MgSO4), filtered, concentrated (45° C., 25 mbar), and air dried to give 1.52 kg (91.9%) of crude product as a white solid. Impurities were removed by saponification. A 12-L, 3-necked, round-bottom flask equipped with a mechanical stirrer, nitrogen bubbler, and a thermocouple probe, was charged with 1.52 kg of crude product, 5.5 L of IPA and 156.5 g of 50% NaOH. The mixture was heated for 30 min at 55-78° C. After cooling to 37° C., the hazy solution was charged into an extractor along with 7.8 L of water and 17 L of DCM. After the phases were separated, the aqueous layer was is extracted with 6 L of DCM. The organic extracts were combined, washed with 7.8 L-of water, dried (MgSO4), filtered, concentrated (50° C., 25 mbar) and air dried to give 1.453 kg (87.7%) of N-(4-hydroxybutyl)-4-ethoxybenzamide (V-5) as a white lumpy solid.

후처리

  1. additionwas added over a period of 50 min
  2. temperaturewhile maintaining a temperature of −7 to −3° C
  3. temperatureto warm to room temperature
  4. concentrationThe light-yellow solution was concentrated (45° C., 50 mbar) to 3.22 kg of an orange oil that
  5. additionwas charged to an extractor along with 5.7 kg of 10% HCl and 6 L DCM
  6. extractionThe aqueous phase was extracted with 3 L DCM
  7. washwashed with 5 L of 0.5 N HCl
  8. washwashed with 5 L of saturated aq. NaHCO3
  9. dry with materialdried (MgSO4)
  10. filtrationfiltered
  11. concentrationconcentrated (45° C., 25 mbar), and air
  12. customdried
  13. customto give 1.52 kg (91.9%) of crude product as a white solid
  14. customImpurities were removed by saponification
  15. customA 12-L, 3-necked, round-bottom flask equipped with a mechanical stirrer
  16. additionnitrogen bubbler, and a thermocouple probe, was charged with 1.52 kg of crude product, 5.5 L of IPA and 156.5 g of 50% NaOH
  17. temperatureThe mixture was heated for 30 min at 55-78° C
  18. temperatureAfter cooling to 37° C.
  19. additionthe hazy solution was charged into an extractor along with 7.8 L of water and 17 L of DCM
  20. customAfter the phases were separated
  21. extractionthe aqueous layer was is extracted with 6 L of DCM
  22. washwashed with 7.8 L-of water
  23. dry with materialdried (MgSO4)
  24. filtrationfiltered
  25. concentrationconcentrated (50° C., 25 mbar) and air
  26. customdried

출처 및 근거

ORD 기록
ord-9b631a24e3ff4f5b8f626f94af56fa35
출처 데이터셋
uspto-grants-2009_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07550469B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트