홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Imidazole → N-Methoxy-N-methyl-2-(1,1,1-trifluorobut-3-en-2-yloxy)acetamide

HRID 2045874
노트
인쇄 미리보기

반응식

HRID 2045874 반응식
[F:1][C:2]([F:16])([F:15])[CH:3]([O:6][CH2:7][C:8]([O:10]C(C)(C)C)=O)[CH:4]=[CH2:5].C1N=CN(C(N2C=NC=C2)=O)C=1.Cl.[CH3:30][NH:31][O:32][CH3:33].N1C=CN=C1>C(OC)(C)(C)C.O.C(O)=O>[CH3:33][O:32][N:31]([CH3:30])[C:8](=[O:10])[CH2:7][O:6][CH:3]([CH:4]=[CH2:5])[C:2]([F:1])([F:15])[F:16]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 795ImidazoleHCID 682631,1'-CarbonyldiimidazoleHCID 81138Methanamine, N-methoxy-, hydrochloride (1:1)HCID 86668365tert-Butyl 2-(1,1,1-trifluorobut-3-en-2-yloxy)acetate

생성물 1

HCID 86668366N-Methoxy-N-methyl-2-(1,1,1-trifluorobut-3-en-2-yloxy)acetamide수율 87.3%

시약·촉매·용매 3

HCID 284
Formic Acid
용매
HCID 962Water용매
HCID 15413tert-Butyl methyl ether용매

반응 조건

온도
57.5 °C

실험 절차

To a reactor containing tert-butyl 2-(1,1,1-trifluorobut-3-en-2-yloxy)acetate (1.150 kg, 4.788 mol) was added formic acid (6.2 kg) at rt. The reaction mixture was heated to 55-60° C. for 4-5 h. The formic acid was evaporated under vacuum (T=40-45° C.) and chased with toluene (2×3.0 L). To the residue was added CH2Cl2 (2.0 L) and further concentrated under vacuum. To the resulting residue was added CH2Cl2 (4.6 L) and the solution was cooled to 0° C., followed by N,N-carbonyldiimidazole (1.05 kg, 6.49 mol) in five portions. The mixture was stirred for 30 mins, and N,O-dimethylhydroxylamine hydrochloride (0.67 kg, 6.72 mol) was added in portions while maintaining temperature below 10° C. The reaction mixture was warmed to rt and stirred over 14 h. The reaction mixture was cooled to 3.2° C. and imidazole (100.7 g, 1.48 mol) was charged in two portions. The reaction mixture was warmed to rt and water (1.4 kg) was added, followed by methyl tert-butyl ether (14.0 L). The organic phase was washed with 2.0 N aq. HCl (1.0 L and 0.7 L), followed by sat. aq. NaHCO3 (1.2 L) and sat. aq. NaCl (1.20 L). The organics were concentrated to afford the title compound as an oil (0.95 kg, 87.2%). 1H NMR (500 MHz, CDCl3) δ ppm 5.85-5.76 (m, 1H), 5.62 (d, J=17.2 Hz, 1H), 5.56 (d, J=10.4 Hz, 1H), 4.49-4.34 (m, 3H), 3.68 (s, 3H), 3.67 (s, 1H), 3.18 (s, 3H), 3.08 (s, 1H); 13C NMR (126 MHz, cdcl3) δ ppm 169.9*, 163.4*, 128.61, 123.87 (d, J=282.0 Hz), 123.82, 78.54 (q, J=31.3 Hz), 66.12, 61.52, 60.56, 36.20, 32.24. Note: this compound is a 3:1 mixture of amide bond rotamers. *Carbonyl chemical shifts estimated indirectly through 1H-13C HMBC (heteronuclear multiple-bond correlation).

후처리

  1. customThe formic acid was evaporated under vacuum (T=40-45° C.) and chased with toluene (2×3.0 L)
  2. additionTo the residue was added CH2Cl2 (2.0 L)
  3. concentrationfurther concentrated under vacuum
  4. additionTo the resulting residue was added CH2Cl2 (4.6 L)
  5. temperaturethe solution was cooled to 0° C.
  6. temperaturewhile maintaining temperature below 10° C
  7. temperatureThe reaction mixture was warmed to rt
  8. stirringstirred over 14 h
  9. temperatureThe reaction mixture was cooled to 3.2° C.
  10. temperatureThe reaction mixture was warmed to rt
  11. washThe organic phase was washed with 2.0 N aq. HCl (1.0 L and 0.7 L)
  12. concentrationThe organics were concentrated

출처 및 근거

ORD 기록
ord-41f8836385984fef9011d49831a1166b
출처 데이터셋
uspto-grants-2013_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08592408B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트