돌아가기
Huagongshe화공사 화학 정보 인쇄 보고서 · 연구 참고용
HRID 20613생성일: 2026년 10월 23일

Methyl 9-decenoate → Methyl 11-hydroxyundecanoate

https://huagongshe.com/ko/reaction/20613

반응식

참여 물질

역할이름HCID투입량
반응물Methyl 9-decenoateHCID 1778877—
반응물(R,R)-2,7-DI-Tert-butyl-9,9-dimethyl-4,5-bis(methylphenylphosphino)xantheneHCID 11534901—
생성물Methyl 11-hydroxyundecanoateHCID 525065—

반응 조건

온도85 °C

반응 단계

A hydroformylation reaction was carried out in a Parr reactor (300 mL capacity) equipped with a mechanical stirrer, gas inlet tube, heating jacket, pressure transducer and thermocouple. The reactor was charged with methyl-9-decenoate (100 g, 0.54 mol), acetylacetonate(dicarbonyl)-rhodium (II) [Rh(CO)2 acac] (32 mg, 0.12 mmol), and 2,7-di-tert-butyl-9,9-dimethyl-4,5-bis(diphenylphosphino)xanthene (342 mg, 0.49 mmol) under nitrogen, and then the reactor was sealed. The reactor was connected to a feed line for delivering synthesis gas (CO/H2, 1:1). The system was flushed with synthesis gas twice and then pressurized to 450 psi (3,103 kPa). The reactor was heated to 85° C. for 16 h while maintaining 450 psi (3,103 kPa) of syn gas pressure. After 16 h, the temperature was raised to 100° C. and heated for an additional 4 h. The reactor was cooled to ambient temperature and the unreacted gas was vented. After flushing the reactor with nitrogen to remove the last traces of syn gas, dioxane (50 ml) and 1 g of 5% Pt/SiO2 were introduced to the reactor. The system was flushed with hydrogen twice and pressurized to 500 psi (3,448 kPa) with hydrogen. The mixture was then heated to 150° C. for 20 h maintaining 500 psi (3,448 kPa) of hydrogen pressure. After cooling, the contents were filtered to remove the solid catalyst, and the solvent was removed by rotary evaporation. The resulting liquid was subjected to distillation under reduced pressure. The fraction boiling at 140-150° C. (1.5 mm pressure) was collected and dissolved in 1200 mL of hexanes. The solution was then allowed to crystallize in a freezer for 18 h. White crystals were collected by cold filtration and washed once with cold hexanes. Drying under reduced pressure yielded methyl 11-hydroxyundecanoate as white solid (77 g; 65% overall yield). Conversion of methyl 11-hydroxyundecanoate via transesterification with a polyol, such as glycerol, to the corresponding polyester polyol, such as the triglyceride of 11-hydroxyundecanoic acid, can be effected by transesterification methods known in the art.

출처 및 근거

DOI10.6084/m9.figshare.5104873.v1
특허 번호US07745652B2
출처 데이터셋uspto-grants-2010_06
ORD IDord-ebffc9de3b4747108093ba3579fac7f5
출처 메모uspto-grants-2010_06