Chloroacetonitrile → 5-tert-Butyl-2-(chloromethyl)-1,3-oxazole

HRID 2085366노트

반응식

HRID 2085366 반응식
B(F)(F)F.CCOCC.[N+:10](=[CH:12][C:13](=[O:18])[C:14]([CH3:17])([CH3:16])[CH3:15])=[N-].[Cl:19][CH2:20][C:21]#N>>[Cl:19][CH2:20][C:21]1[O:18][C:13]([C:14]([CH3:17])([CH3:16])[CH3:15])=[CH:12][N:10]=1

참가 물질

4

반응물 3

HCID 7856Chloroacetonitrile2회HCID 8000Boron trifluoride etherateHCID 217927841-Diazonio-3,3-dimethylbut-1-en-2-olate

생성물 1

HCID 129689745-tert-Butyl-2-(chloromethyl)-1,3-oxazole

반응 조건

온도
0 °C

실험 절차

To a stirred solution of chloroacetonitrile (40 mL) and boron trifluoride etherate (20 mL, 0.16 mmol) at 0° C. was added 1-diazo-3,3-dimethyl-2-butanone in chloroacetonitrile (40 mL) dropwise over a period of 20 minutes. After addition was complete, the mixture was stirred at 0° C. for one hour and then partitioned between saturated NaHCO3, solution (700 mL) and CH2Cl2 (500 mL). The aqueous solution was extracted with CH2Cl2 (500 mL) and the combined organic layers were washed with brine (400 mL) and dried over MgSO4. After filtration, the solution was concentrated and then distilled under vacuum using an oil bath temperature of 40° C. The 2-(chloromethyl)-5-t-butyloxazole (9.2 g, 44% overall from the acid chloride, C8H12ClNO, MS m/e 174 (M+H)+) was obtained as a light yellow oil.

후처리

  1. additionAfter addition
  2. custompartitioned between saturated NaHCO3, solution (700 mL) and CH2Cl2 (500 mL)
  3. extractionThe aqueous solution was extracted with CH2Cl2 (500 mL)
  4. washthe combined organic layers were washed with brine (400 mL)
  5. dry with materialdried over MgSO4
  6. filtrationAfter filtration
  7. concentrationthe solution was concentrated
  8. distillationdistilled under vacuum
  9. customtemperature of 40° C

출처 및 근거

ORD 기록
ord-ca75c1ac79204baebe7b3e7f89a7d04e
출처 데이터셋
uspto-grants-2004_04
특허 번호
US06720347B2

반응 노트

불러오는 중…