홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Carbon Dioxide → 2-Chloro-4-morpholinothieno[3,2-d]pyrimidine-6-carboxylic acid

HRID 2098744
인쇄

반응식

HRID 2098744 반응식
[Cl:1][C:2]1[N:3]=[C:4]([N:11]2[CH2:16][CH2:15][O:14][CH2:13][CH2:12]2)[C:5]2[S:10][CH:9]=[CH:8][C:6]=2[N:7]=1.[Li]CCCC.[C:22](=[O:24])=[O:23]>C1COCC1>[Cl:1][C:2]1[N:3]=[C:4]([N:11]2[CH2:16][CH2:15][O:14][CH2:13][CH2:12]2)[C:5]2[S:10][C:9]([C:22]([OH:24])=[O:23])=[CH:8][C:6]=2[N:7]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 280Carbon Dioxide2회HCID 202849712-Chloro-4-(morpholin-4-yl)thieno(3,2-d)pyrimidineHCID 178418339Butyllithium

생성물 1

HCID 595931312-Chloro-4-morpholinothieno[3,2-d]pyrimidine-6-carboxylic acid

시약·촉매·용매 1

HCID 8028Tetrahydrofuran용매

반응 조건

온도
-78 °C

실험 절차

2-Chloro-4-morpholinothieno[3,2-d]pyrimidine 4 (2.5 g) was cooled to −78° C. in 50 mL of THF before adding 1.3 eq of a 2.5M solution of nBuLi in hexanes. The reaction was stirred at −78° C. for 30 minutes before warming to −40° C. for several minutes to allow for complete formation of the Lithium anion. The reaction was then re-cooled to −78° C. and carbon dioxide gas evolved from dry ice was bubbled in via cannula to the reaction solution for 1 hour. The reaction was then slowly warmed to 0° C. over 30 minutes and the THF was concentrated by rotovap. The reaction was then quenched with water and extracted with Ethyl Acetate to remove any 2-chloro-4-morpholinothieno[3,2-d]pyrimidine. The aqueous layer was then brought to pH of 2-3 by adding concentrated HCl. The resultant solid that crashed out of the aqueous layer was then collected by Buchner funnel, rinsed with water and dried overnight under vacuum to yield 2.65 g of 2-chloro-4-morpholinothieno[3,2-d]pyrimidine-6-carboxylic acid. 500 mg of this intermediate was then subjected to Procedure A. Upon extraction into Ethyl Acetate, the product remains in the aqueous layer and is treated with 20 eq of Amberlite IR-120 ion-exchange resin for 2 hours or until the solution becomes cloudy. The solution is first filtered thru a coarse Filter Flask to remove the resin and is then filtered thru a Buchner funnel to collect the 637 mg of 2-(1H-indazol-4-yl)-4-morpholinothieno[3,2-d]pyrimidine-6-carboxylic acid 13 as a light brown solid.

후처리

  1. temperaturebefore warming to −40° C. for several minutes
  2. temperatureThe reaction was then re-cooled to −78° C.
  3. customwas bubbled in via cannula to the reaction solution for 1 hour
  4. temperatureThe reaction was then slowly warmed to 0° C. over 30 minutes
  5. concentrationthe THF was concentrated by rotovap
  6. customThe reaction was then quenched with water
  7. extractionextracted with Ethyl Acetate
  8. customto remove any 2-chloro-4-morpholinothieno[3,2-d]pyrimidine
  9. additionby adding concentrated HCl
  10. customwas then collected by Buchner funnel
  11. washrinsed with water
  12. customdried overnight under vacuum

출처 및 근거

ORD 기록
ord-f1fe530e7ee4470eb9650a143f50f5d3
출처 데이터셋
uspto-grants-2013_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08450315B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트