3-Methoxypropylamine → 3-(4-bromophenyl)-N-(3-methoxypropyl)propan-1-amine

HRID 217785

반응식

HRID 217785 반응식
CS(O[CH2:6][CH2:7][CH2:8][C:9]1[CH:14]=[CH:13][C:12]([Br:15])=[CH:11][CH:10]=1)(=O)=O.[CH3:16][O:17][CH2:18][CH2:19][CH2:20][NH2:21].C(=O)([O-])[O-].[K+].[K+]>C(#N)C>[Br:15][C:12]1[CH:13]=[CH:14][C:9]([CH2:8][CH2:7][CH2:6][NH:21][CH2:20][CH2:19][CH2:18][O:17][CH3:16])=[CH:10][CH:11]=1

참가 물질

5

반응 조건

온도
85 °C

실험 절차

3-(4-bromophenyl)propyl methanesulfonate (418 g) and acetonitrile (2 L) were charged into reactor 1. 3-methoxypropylamine (305 g) and potassium carbonate (394 g) were added to reactor 1 and the mixture was warmed to 80-90° C. for 4-16 h. The mixture was analysed for completion (3-(4-bromophenyl)propyl methanesulfonate <0.5%). The reaction was cooled to 25° C. and the suspension was filtered to remove the white solids. The filtrate was concentrated to dryness on a rotary evaporator. The crude product from the rotary evaporator, MTBE (2 L) and water (1.5 L) were charged into reactor 2. After phase separation, the organic layer was collected and washed with 1N HCl (2 L) until pH=4-5. After phase separation, the aqueous phase was basified by 2.5N NaOH solution to pH=9-10 and the resulting aqueous solution was used in the next step without further treatment.

후처리

  1. temperatureThe reaction was cooled to 25° C.
  2. filtrationthe suspension was filtered
  3. customto remove the white solids
  4. concentrationThe filtrate was concentrated to dryness on a rotary evaporator
  5. customThe crude product from the rotary evaporator, MTBE (2 L) and water (1.5 L)
  6. additionwere charged into reactor 2
  7. customAfter phase separation
  8. customthe organic layer was collected
  9. washwashed with 1N HCl (2 L) until pH=4-5
  10. customAfter phase separation

출처 및 근거

ORD 기록
ord-a183de74b8264e66a58fed0d0b7f9435
출처 데이터셋
uspto-grants-2012_06
특허 번호
US08198285B2

연결된 노트

불러오는 중…