홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ammonium Chloride → ethyl 4-(4-amino-3-fluorophenyl)-5-cyano-1H-pyrrole-3-carboxylate

HRID 2197522
인쇄

반응식

HRID 2197522 반응식
[Cl-].[NH4+].[C:3]([C:5]1[NH:9][CH:8]=[C:7]([C:10]([O:12][CH2:13][CH3:14])=[O:11])[C:6]=1[C:15]1[CH:20]=[CH:19][C:18]([N+:21]([O-])=O)=[C:17]([F:24])[CH:16]=1)#[N:4]>C(O)C.O.CO.[Fe]>[NH2:21][C:18]1[CH:19]=[CH:20][C:15]([C:6]2[C:7]([C:10]([O:12][CH2:13][CH3:14])=[O:11])=[CH:8][NH:9][C:5]=2[C:3]#[N:4])=[CH:16][C:17]=1[F:24]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 2

HCID 25517Ammonium ChlorideHCID 57758340ethyl 5-cyano-4-(3-fluoro-4-nitrophenyl)-1H-pyrrole-3-carboxylate

생성물 1

HCID 66786676ethyl 4-(4-amino-3-fluorophenyl)-5-cyano-1H-pyrrole-3-carboxylate수율 94%

시약·촉매·용매 4

HCID 23925Iron촉매HCID 702Ethanol용매
HCID 887
Methanol
용매
HCID 962Water용매

반응 조건

온도
70 °C

실험 절차

Iron (Alrich cat#20930-9, 24.9 g, 445 mmol) and ammonium chloride (4.80 g, 89.7 mmol) were added to a suspension of ethyl 5-cyano-4-(3-fluoro-4-nitrophenyl)-1H-pyrrole-3-carboxylate (45.0 g, 148 mmol) in ethanol (540 mL) and water (180 mL) equipped with an overhead stirrer. The reaction was warmed (70° C.) for 2 h, and then cooled to rt. The mixture was diluted with methanol (500 mL) and then filtered through a well-packed pad of Celite®. The filter cake was thoroughly rinsed with methanol (1 L) and acetonitrile (2 L) and the combined filtrate was evaporated. The residue was dissolved in ethyl acetate (1.5 L) then washed with water (500 mL) and brine (500 mL). The organic layer was dried over sodium sulfate and evaporated under reduced pressure to afford the desired product (38.0 g, 94%) containing trace impurities (<5%). The material was used in the next step without further purification. 1H NMR (300 MHz, DMSO-d6) δ 13.36 (s, 1H), 8.25 (dd, J=12.8, 2.0 Hz, 1H), 6.92-6.97 (m, 1H), 6.72-6.79 (m, 1H), 5.35 (s, 2H), 4.10 (q, J=7.0 Hz, 2H), 1.16 (t, J=7.0 Hz, 3H); ES-MS m/z 274.3 (MH)+; HPLC RT (Method A) 2.62 min.

후처리

  1. customequipped with an overhead stirrer
  2. temperaturecooled to rt
  3. filtrationfiltered through a well-packed pad of Celite®
  4. washThe filter cake was thoroughly rinsed with methanol (1 L) and acetonitrile (2 L)
  5. customthe combined filtrate was evaporated
  6. dissolutionThe residue was dissolved in ethyl acetate (1.5 L)
  7. washthen washed with water (500 mL) and brine (500 mL)
  8. dry with materialThe organic layer was dried over sodium sulfate
  9. customevaporated under reduced pressure

출처 및 근거

ORD 기록
ord-256947082bce40e29cb62ce43606d213
출처 데이터셋
uspto-grants-2012_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08338594B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트