홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.2
  1. 홈
  2. /반응

1,2-Dimethoxyethane → 5-(5-Tert-butyl-2-hydroxy-phenyl)-furan-2-carbaldehyde

HRID 2197678
인쇄

반응식

HRID 2197678 반응식
Br[C:2]1[CH:7]=[C:6]([C:8]([CH3:11])([CH3:10])[CH3:9])[CH:5]=[CH:4][C:3]=1[OH:12].[CH:13]([C:15]1[O:19][C:18](B(O)O)=[CH:17][CH:16]=1)=[O:14].C(=O)([O-])[O-].[Na+].[Na+].COCCOC>C(OC)(C)(C)C.O>[C:8]([C:6]1[CH:5]=[CH:4][C:3]([OH:12])=[C:2]([C:18]2[O:19][C:15]([CH:13]=[O:14])=[CH:16][CH:17]=2)[CH:7]=1)([CH3:11])([CH3:10])[CH3:9]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 80711,2-DimethoxyethaneHCID 10340Sodium CarbonateHCID 751472-Bromo-4-tert-butylphenolHCID 27343555-Formylfuran-2-boronic acid

생성물 1

HCID 594462335-(5-Tert-butyl-2-hydroxy-phenyl)-furan-2-carbaldehyde수율 7.4%

시약·촉매·용매 2

HCID 962
Water
용매
HCID 15413tert-Butyl methyl ether용매

반응 조건

온도
65 °C

실험 절차

A reaction flask was flushed with nitrogen and charged with 2-bromo-4-tert-butyl-phenol (2.019 g, 8.81 mmol), 5-formyl-furan-2-boronic acid (1.831 g, 13.09 mmol) and sodium carbonate (2.783 g, 26.26 mmol). A mixture of 1,2-dimethoxyethane (40 mL) and water (13 mL) was added and the reaction mixture was stirred for 10 min under a nitrogen atmosphere. Dichlorobis(triphenylphosphine) palladium(II) (0.193 g, 0.27 mmol) was added and the mixture was stirred and heated to 65° C. for 17 h. The mixture was cooled to room temperature, diluted with methyl tert-butyl ether (MTBE) (250 mL) and washed successively with 5% aq. potassium carbonate (100 mL), water (100 mL) and brine. The organic layer was separated, dried over sodium sulfate and concentrated under reduced pressure. The residue was chromatographed on flash Silica (100 g, 5 to 10% ethyl acetate in hexanes) to afford 5-(5-tert-butyl-2-hydroxy-phenyl)-furan-2-carbaldehyde (160 mg, 7%). 1H NMR (400 MHz, CDCl3): δ 1.33 (9H, s) 6.51 (1H, bs), 6.90 (1H, d, J=8.8 Hz), 7.03 (1H, d, J=4.0 Hz), 7.32 (1H, dd, J=8.8, 2.4 Hz), 7.36 (1H, d, J=3.6 Hz), 7.73 (1H, d, J=3.2 Hz), 9.64 (1H, s). ESI-MS: 243.0.

후처리

  1. customA reaction flask was flushed with nitrogen
  2. additionwas added
  3. stirringthe mixture was stirred
  4. temperatureThe mixture was cooled to room temperature
  5. washwashed successively with 5% aq. potassium carbonate (100 mL), water (100 mL) and brine
  6. customThe organic layer was separated
  7. dry with materialdried over sodium sulfate
  8. concentrationconcentrated under reduced pressure
  9. customThe residue was chromatographed on flash Silica (100 g, 5 to 10% ethyl acetate in hexanes)

출처 및 근거

ORD 기록
ord-4dbd7c118c414e649b114972156dc15e
출처 데이터셋
uspto-grants-2012_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08338465B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트