[F:1][C:2]1[CH:7]=[C:6](I)[CH:5]=[CH:4][C:3]=1[NH:9][C:10](=[O:12])[CH3:11].[Cu][C:14]#[N:15].O.C(O)C>CC(O)COC(C(C)=C)=O>[C:14]([C:6]1[CH:5]=[CH:4][C:3]([NH:9][C:10](=[O:12])[CH3:11])=[C:2]([F:1])[CH:7]=1)#[N:15]N-(2-Fluoro-4-iodo-phenyl)-acetamide (63 g, 226 mmol) was dissolved in HPMA (100 mL). Copper(1) cyanide (20.6 g, 230 mmol) was added and the mixture heated to an external temperature of 153° C. for 5 h. The hot reaction mixture was poured into water (1 L) with stirring. A large amount of solid formed. The solid was filtered and washed with water (200 mL). The solid was extracted by heating in a flask with methylene chloride (500 mL) for 15 min. The solid was filtered off, washed with methylene chloride (3×100 mL). The combined organic extracts were washed with brine (200 mL), dried over anhydrous sodium sulfate, filtered and concentrated to give a brown-orange solid. Ethanol (100 mL) was added and the mixture heated to reflux. The solid did not all dissolve. The cooled mixture was filtered to give a light brown solid. The filtrate was concentrated to ½ volume and cooled overnight to give a further crop of solid. The combined solids were washed with cold ethanol (30 mL) and dried under vacuum to give 30 g (168 mmol). Yield: 75%; mp 173° C.; 1H NMR (400 MHz, DMSO-d6) δ 10.3 (br s, 1H, NH), 8.3 (t, J=8.2 Hz, 1H), 7.9 (d, J=10.7 Hz, 1H), 7.67 (d, J=10.7 Hz, 1H), 2.16 (s, 3H, Me).