홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Acetic Acid → ethyl 7-tert-butyl-6-chloro-2-(trifluoromethyl)-2H-chromene-3-carboxylate

HRID 2214840
인쇄

반응식

HRID 2214840 반응식
[CH3:1][C:2]([C:5]1[CH:23]=[CH:22][C:8]2[CH:9]=[C:10]([C:17]([O:19][CH2:20][CH3:21])=[O:18])[CH:11]([C:13]([F:16])([F:15])[F:14])[O:12][C:7]=2[CH:6]=1)([CH3:4])[CH3:3].C(O)(=O)C.O.[Cl:29]Cl>C(OCC)(=O)C.[Zn]>[Cl:29][C:23]1[C:5]([C:2]([CH3:3])([CH3:1])[CH3:4])=[CH:6][C:7]2[O:12][CH:11]([C:13]([F:15])([F:16])[F:14])[C:10]([C:17]([O:19][CH2:20][CH3:21])=[O:18])=[CH:9][C:8]=2[CH:22]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 176Acetic AcidHCID 962WaterHCID 24526ChlorineHCID 21883685Ethyl 7-(1,1-dimethylethyl)-2-(trifluoromethyl)-2h-1-benzopyran-3-carboxylate

생성물 1

HCID 21883510ethyl 7-tert-butyl-6-chloro-2-(trifluoromethyl)-2H-chromene-3-carboxylate수율 106.6%

시약·촉매·용매 2

HCID 23994
Zinc
촉매
2회
HCID 8857Ethyl Acetate용매

반응 조건

온도
15 °C

실험 절차

A one liter three-neck flask equipped with mechanical stirrer and gas inlet tube was charged with the ester (Step 2) (100 g, 0.3 mole) and acetic acid (300 mL). While cooling (water bath) the reaction mixture, chlorine gas (37.6 g, 0.53 mole) was added which caused the temperature to rise to 48° C. After stirring for two hours, the reaction was cooled in an ice-water bath to 15° C. Zinc powder (19.5 g, 0.3 mole) was added in one portion which caused the temperature to rise to 72° C. After cooling to room temperature additional zinc powder (5.0 g, 0.08 mole) was added and the mixture was stirred for 0.5 hour longer. The crude mixture was filtered through diatomaceous earth and was concentrated in vacuo yielding an oil. The oil was dissolved in ethyl acetate (700 mL) washed with brine-water (1:1, 1 L) and brine (0.5 L). The resulting aqueous phase was extracted with ethyl acetate (700 mL). This ethyl acetate phase was washed with brine-water (1:1, 1 L) and brine (0.5 L). The combined organic phases were dried over MgSO4, filtered and concentrated in vacuo yielding the title compound as a yellow oil (116 g, 106%). This material, which contained some entrained ethyl acetate, was of suitable purity to be used in subsequent steps without further purification.

후처리

  1. customA one liter three-neck flask equipped with mechanical stirrer and gas inlet tube
  2. additionwas added which
  3. customto rise to 48° C
  4. customto rise to 72° C
  5. additionwas added
  6. stirringthe mixture was stirred for 0.5 hour longer
  7. filtrationThe crude mixture was filtered through diatomaceous earth
  8. concentrationwas concentrated in vacuo
  9. customyielding an oil
  10. washwashed with brine-water (1:1, 1 L) and brine (0.5 L)
  11. extractionThe resulting aqueous phase was extracted with ethyl acetate (700 mL)
  12. washThis ethyl acetate phase was washed with brine-water (1:1, 1 L) and brine (0.5 L)
  13. dry with materialThe combined organic phases were dried over MgSO4
  14. filtrationfiltered
  15. concentrationconcentrated in vacuo

출처 및 근거

ORD 기록
ord-9276532165b54226b0c1e91f2b1be07c
출처 데이터셋
uspto-grants-2006_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07109211B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트