홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Hexamethyldisiloxane → Trimethylsilyl 2,2,3,3,3-pentafluoropropanoate

HRID 2226317
노트
인쇄 미리보기

반응식

HRID 2226317 반응식
[CH3:1][Si:2]([CH3:5])([CH3:4])[O-:3].[K+].C[Si](C)(C)O[Si](C)(C)C.[F:16][C:17]([F:25])([C:21]([F:24])([F:23])[F:22])[C:18](F)=[O:19]>>[C:21]([C:17]([C:18]([O:3][Si:2]([CH3:5])([CH3:4])[CH3:1])=[O:19])([F:25])[F:16])([F:24])([F:23])[F:22]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 3

HCID 24764HexamethyldisiloxaneHCID 67912Perfluoropropionyl fluorideHCID 23668039Potassium trimethylsilanolate

생성물 1

HCID 12452932Trimethylsilyl 2,2,3,3,3-pentafluoropropanoate

반응 조건

온도
125 °C

실험 절차

A 200 mL Hastelloy® pressure vessel was heated for 6 hr at 150° C. under a nitrogen purge. At room temperature, the vessel was charged with potassium trimethylsilanolate (0.65 g, 5.1 mmol) and hexamethyldisiloxane (81 g, 0.50 tool) and then sealed, cooled and evacuated. Pentafluoropropionyl fluoride (47.4 g, 0.27 mol) was transferred from a cycinder to the pressure vessel. Once sealed, it was heated at 125° C. (barricade). The pressure rapidly increased to 1.79 MPa and then dropped to 0.62 MPa during a 1.5 hr period. The pressure vessel was heated for a total of 24 hr. The cooled pressure vessel was pressurized with nitrogen and the contents were transferred to a dried bottle. The crude product was transferred under vacuum and subsequently fractionated by spinning band distillation to remove most of the trimethylsilyl fluoride. The remaining 100 g of colorless liquid was a mixture of three components: trimethylsilyl pentafluoropropionate (49.7%) , hexamethyldisiloxane (42.6%) , and trimethylsilyl fluoride (7.6%) as determined by GC analysis, 1H and 19F NMR analyses. 19F NMR(CDCl3): -83.4 (s, CF3), -122.28 (s, CF2), -158.2 (m, SiF). 1H NMR: 0.40 (s, CO2SiMe3), 0.22 (d, Me3SiF), and 0.06 (s, Me6Si2O). GC/MS analysis of a previously prepared sample of CF3CF2CO2SiMe3 featured a component with m/[email protected] (calcd forC5H6F5SiO2 =221.005722), consistent with M--CH3.

후처리

  1. custompurge
  2. customsealed
  3. temperaturecooled
  4. customevacuated
  5. customOnce sealed
  6. temperatureThe pressure rapidly increased to 1.79 MPa
  7. additiondropped to 0.62 MPa during a 1.5 hr period
  8. temperatureThe pressure vessel was heated for a total of 24 hr
  9. distillationband distillation
  10. customto remove most of the trimethylsilyl fluoride
  11. additiona mixture of three components

출처 및 근거

ORD 기록
ord-66eec287cb754d1e983491102dac7dca
출처 데이터셋
uspto-grants-1994_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05347058

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트