홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

1-(4-methoxybenzyl)-4-(2-fluoro-4-nitrophenoxy)-3-iodo-1H-pyrazolo[3,4-b]pyridine → 3-Fluoro-4-((3-iodo-1-(4-methoxybenzyl)-1H-pyrazolo[3,4-b]pyridin-4-yl)oxy)aniline

HRID 2241190
인쇄

반응식

HRID 2241190 반응식
[CH3:1][O:2][C:3]1[CH:30]=[CH:29][C:6]([CH2:7][N:8]2[C:12]3=[N:13][CH:14]=[CH:15][C:16]([O:17][C:18]4[CH:23]=[CH:22][C:21]([N+:24]([O-])=O)=[CH:20][C:19]=4[F:27])=[C:11]3[C:10]([I:28])=[N:9]2)=[CH:5][CH:4]=1>CCO>[CH3:1][O:2][C:3]1[CH:4]=[CH:5][C:6]([CH2:7][N:8]2[C:12]3=[N:13][CH:14]=[CH:15][C:16]([O:17][C:18]4[CH:23]=[CH:22][C:21]([NH2:24])=[CH:20][C:19]=4[F:27])=[C:11]3[C:10]([I:28])=[N:9]2)=[CH:29][CH:30]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

3

반응물 1

HCID 672214351-(4-methoxybenzyl)-4-(2-fluoro-4-nitrophenoxy)-3-iodo-1H-pyrazolo[3,4-b]pyridine

생성물 1

HCID 672210033-Fluoro-4-((3-iodo-1-(4-methoxybenzyl)-1H-pyrazolo[3,4-b]pyridin-4-yl)oxy)aniline

시약·촉매·용매 1

HCID 702Ethanol용매

반응 조건

온도
65 °C

실험 절차

A stirred mixture of 1-(4-methoxybenzyl)-4-(2-fluoro-4-nitrophenoxy)-3-iodo-1H-pyrazolo[3,4-b]pyridine (10.4 g, 20.0 mmol), stannous chloride-dihydrate (22.6 g, 100.0 mmol), and absolute EtOH (200 mL) was heated to 65° C. for 1.5 hours under N2. After cooling to room temperature, the reaction was concentrated in vacuo, and then diluted with DCM (100 mL) and water (100 mL). Aqueous 2N NaOH was added until the pH of the aqueous phase was in the 11-12 range. The biphasic suspension was filtered through a pad of celite, rinsing with DCM (3×100 mL). The filtered biphase was separated, and the aqueous phase was re-extracted with DCM (3×75 mL). The combined organic phases were dried (Na2SO4), filtered, and concentrated. Yield: 7.90 g, 78%. The product was used in the next step without purification. 1H NMR (400 MHz, CDCl3) δ 8.30 (d, J=6 Hz, 1H), 7.35 (d, J=9 Hz, 2H), 7.03 (t, J=9 Hz, 1H), 6.83 (d, J=9 Hz, 2H), 6.53 (m, 2H), 6.24 (m, 1H), 5.61 (s, 2H), 3.81 (s, 2H), 3.76 (s, 3H).

후처리

  1. temperatureAfter cooling to room temperature
  2. concentrationthe reaction was concentrated in vacuo
  3. additiondiluted with DCM (100 mL) and water (100 mL)
  4. additionAqueous 2N NaOH was added until the pH of the aqueous phase
  5. filtrationThe biphasic suspension was filtered through a pad of celite
  6. washrinsing with DCM (3×100 mL)
  7. customThe filtered biphase was separated
  8. extractionthe aqueous phase was re-extracted with DCM (3×75 mL)
  9. dry with materialThe combined organic phases were dried (Na2SO4)
  10. filtrationfiltered
  11. concentrationconcentrated
  12. customThe product was used in the next step without purification

출처 및 근거

ORD 기록
ord-30813002968e4cb2848ced9fa0ab3b5d
출처 데이터셋
uspto-grants-2010_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07723330B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트