홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Cannabidiol → Tetrahydrocannabinol

HRID 2243453
인쇄

반응식

HRID 2243453 반응식
[CH3:1][CH2:2][CH2:3][CH2:4][CH2:5][C:6]1[CH:7]=[C:8]([OH:23])[C:9]([C@H:13]2[C@H:18]([C:19]([CH3:21])=[CH2:20])[CH2:17][CH2:16][C:15]([CH3:22])=[CH:14]2)=[C:10]([OH:12])[CH:11]=1.C([Al](CC(C)C)CC(C)C)C(C)C>ClCCl>[CH3:1][CH2:2][CH2:3][CH2:4][CH2:5][C:6]1[CH:11]=[C:10]([OH:12])[C:9]2[C@@H:13]3[CH:14]=[C:15]([CH3:22])[CH2:16][CH2:17][C@H:18]3[C:19]([CH3:21])([CH3:20])[O:23][C:8]=2[CH:7]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 644019CannabidiolHCID 16682931Triisobutylaluminum2회

생성물 1

HCID 16078Tetrahydrocannabinol

시약·촉매·용매 1

HCID 6344Dichloromethane용매

반응 조건

온도
22.5 °C

실험 절차

To a nitrogen inerted, stirred solution of cannabidiol (21.2 g, 67.1 mmol) in dichloromethane (370 mL) was added, by syringe pump, commercial tri-isobutylaluminum solution (1 M in hexanes, 6.7 mL, 10 mol %) over 4.5 hours. The temperature of the reaction mixture was maintained at 20-25° C. and the mixture was stirred overnight. Additional charges of triisobutylaluminum solution (1 M in hexanes, 2.67 mL added, 4 mol %) were made over the next day to drive the reaction to >99% conversion by HPLC analysis. The reaction was quenched by addition of water (250 mL), stirred 30 minutes, combined with a slurry of celite in dichloromethane (10.0 g in 70 mL dichloromethane) and then clarified. The reactor and filter cake were rinsed with dichloromethane (50 mL) and the combined filtrates distilled under reduced pressure (25° C. pot temperature, 22 inches of vacuum) to about 50 mL volume. Toluene (106 mL) was added and the solvents again removed under reduced pressure. More toluene (106 mL) was added and removed under reduced pressure and then the dichloromethane-free residue was reconstituted in toluene (100 mL). HPLC analysis showed 95.6% delta-9-tetrahydrocannabinol, 1.1% cis-tetrahydrocannabinol, and no cannabinol. (Sunfire C18 5u, 4.6 mm×150 mm, 1 ml/min, gradient 80% 0.1% TFA/water and 20% 0.05% TFA/acetonitrile to 100% 0.05% TFA/acetonitrile over 15 minutes, delta-9 tetrahydrocannabinol: rt=15.1 min). The yield was estimated at 95%. The solution was stored under nitrogen until needed for preparation of the camphorsulfonate derivative.

후처리

  1. customthe reaction to >99% conversion by HPLC analysis
  2. customThe reaction was quenched by addition of water (250 mL)
  3. stirringstirred 30 minutes
  4. filtrationThe reactor and filter cake
  5. washwere rinsed with dichloromethane (50 mL)
  6. distillationthe combined filtrates distilled under reduced pressure (25° C. pot temperature, 22 inches of vacuum) to about 50 mL volume
  7. additionToluene (106 mL) was added
  8. customthe solvents again removed under reduced pressure
  9. additionMore toluene (106 mL) was added
  10. customremoved under reduced pressure
  11. custom(Sunfire C18 5u, 4.6 mm×150 mm, 1 ml/min, gradient 80% 0.1% TFA/water and 20% 0.05% TFA/acetonitrile to 100% 0.05% TFA/acetonitrile over 15 minutes, delta-9 tetrahydrocannabinol: rt=15.1 min)
  12. customuntil needed for preparation of the camphorsulfonate derivative

출처 및 근거

ORD 기록
ord-68ffe497b6a94bb4af479a79d79b8c99
출처 데이터셋
uspto-grants-2010_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07674922B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트