Sodium Chloride → N-(2,2-Dimethoxyethyl)-2-propenamide

참여 물질

반응 단계

40 g (1.0 mol) of sodium hydroxide are dissolved in 100 g of water and 200 g of ice in a 1-liter reactor having a stirrer and a cooling system. The sodium hydroxide solution is cooled to 10° C., and 105.1 g (1.0 mol) of aminoacetaldehyde dimethyl-acetal and 10 mg of the inhibitor 4-hydroxy-2,2,6,6-tetramethylpiperidin-1-oxide are added. 99.5 g (1.1 mol) of acrylic acid chloride are slowly added to that solution at 10° C. over a period of 2 hours. The pH value drops slowly and ultimately is adjusted to 7. According to GC, amine is no longer present. The reaction mixture is saturated with sodium chloride and extracted three times with 200 ml of tert-butyl methyl ether. The organic phase is dried, filtered and concentrated using a rotary evaporator. The resulting oil is extracted three times with petroleum ether and then dried again using a rotary evaporator. 130 g of acrylamido-acetaldehyde dimethylacetal (81% of theory) are obtained in the form of an oil; the product is 99% according to GC.

출처 및 근거