참여 물질
| 역할 | 이름 | HCID | 투입량 |
|---|
| 반응물 | Iodine | HCID 807 | — |
| 반응물 | N,N,N',N'-Tetramethylethylenediamine | HCID 8037 | — |
| 반응물 | 2,2,6,6-Tetramethylpiperidine | HCID 13035 | — |
| 반응물 | Sodium Thiosulfate Pentahydrate | HCID 61475 | — |
| 반응물 | 2,2-Dimethyl-n-(6-thiomorpholin-4-yl-pyridin-3-yl)-propionamide | HCID 22591447 | — |
| 반응물 | Butyllithium | HCID 178418339 | — |
| 용매 | Tetrahydrofuran | HCID 8028 | — |
| 용매 | Hexane | HCID 8058 | — |
| 용매 | tert-Butyl methyl ether | HCID 15413 | — |
| 생성물 | n-(4-Iodo-6-thiomorpholin-4-yl-pyridin-3-yl)-2,2-dimethyl-propionamide | HCID 22591449 | 63.4% |
반응 단계
Under argon) a solution of 75 g (268 mmol) 2,2-dimethyl-N-(6-thiomorpholin-4-yl-pyridin-3-yl)-propionamide, 187 g (1.61 mol) N,N,N′,N′-tetramethylethylenediamine and 85 g (604 mmol) 2,2,6,6,-tetramethylpiperidine in 750 ml tetrahydrofuran was cooled to −65° C. in a dry ice bath. Within 30 min, 805 ml (1.29 mol) of a 1.6 N n-butyllithium solution in hexane were added dropwise. The reaction mixture was allowed to warm up to −15° C. and was stirred for 3 h at this temperature. After cooling again to −70° C., 354 g (1.40 mol) iodine (dissolved in 1000 ml tetrahydrofuran) were added dropwise during 2 h and stirring was continued for 1 h. The suspension was warmed to −60° C. and was poured into 1000 ml of 30% sodium thiosulfate pentahydrate solution. Then, 750 ml tert-butyl methyl ether were added and the organic layer was separated. The aqueous layer was extracted three times with 750-ml portions of tert-butyl methyl ether and the combined organic layers were dried (sodium sulfate) and evaporated. Flash chromatography gave 68.9 g (63%) of the title compound as light brown crystals.
출처 및 근거
| DOI | 10.6084/m9.figshare.5104873.v1 |
|---|
| 특허 번호 | US06849624B2 |
|---|
| 출처 데이터셋 | uspto-grants-2005_02 |
|---|
| ORD ID | ord-cde684b0dfb44ff4867ced69a2c281fc |
|---|
| 출처 메모 | uspto-grants-2005_02 |
|---|