홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Thionyl Chloride → 2-Chromanecarbonyl chloride

HRID 227689
인쇄

반응식

HRID 227689 반응식
S(Cl)([Cl:3])=O.F[C:6]1[CH:7]=[C:8]2[C:13](=[CH:14][CH:15]=1)[O:12][CH:11]([C:16]([OH:18])=O)[CH2:10][CH2:9]2>C1(C)C=CC=CC=1.CN(C=O)C>[O:12]1[C:13]2[C:8](=[CH:7][CH:6]=[CH:15][CH:14]=2)[CH2:9][CH2:10][CH:11]1[C:16]([Cl:3])=[O:18]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 2

HCID 24386Thionyl ChlorideHCID 153828436-Fluoro-3,4-dihydro-2H-1-benzopyran-2-carboxylic acid

생성물 1

HCID 27945832-Chromanecarbonyl chloride수율 124.8%

시약·촉매·용매 2

HCID 6228Dimethylformamide촉매HCID 1140Toluene용매

반응 조건

온도
65 °C

실험 절차

Thionylchloride (109.21 g, 918 mmol) was added under nitrogen atmosphere at 20-25° C. to a suspension of 6-fluorochroman-2-carboxylic acid (90.00 g, 459 mmol) and DMF (1.68 g, 23 mmol) in toluene (635 ml). Afterwards, the suspension was heated to an internal temperature of 60-70° C., whereupon a clear yellow solution was obtained under simultaneous evolution of a gas. The reaction was completed within 70 min at this temperature, and the mixture was then concentrated in vacuum (bath temperature 45-50° C., pressure≦35 mbar) to yield the chroman-2-carboxylic acid chloride as a yellow oil (112.65 g). The crude product was dissolved in methylene chloride (65 ml) and added slowly under nitrogen atmosphere to a solution of Meldrum's acid (70.90 g, 482 mmol) and pyridine (72.62 g, 918 mmol) in methylene chloride (261 ml) at an internal temperature of 0-10° C. The reaction mixture was allowed to warm to 20-25° C. within 50 min. and stirred at this temperature for additional 30 min. Methylene chloride (325 ml) and water (325 ml) were then added to the formed brown suspension. The two phase mixture was stirred for 5 min, separated, and the organic layer was subsequently extracted twice with water (200 ml each), then with 2N aqueous HCl solution (250 ml) and finally with water (250 ml). After drying over Na2SO4, the organic layer was filtrated and concentrated in vacuo (≦50 mbar) to give a brown, viscous oil (170.76 g), which crystallized after 10 min at room temperature. The solid was slurried at 20-25° C. in diisopropyl ether (500 ml) for 2 h. After filtration of the suspension, the wet product was washed with diisopropyl ether (70 ml) and dried in vacuo (13 h at 40° C.) to give a yellow-ocher colored solid (yield: 114.71 g, HPLC-purity: 96.98%).

후처리

  1. customwas obtained under simultaneous evolution of a gas
  2. concentrationthe mixture was then concentrated in vacuum (bath temperature 45-50° C., pressure≦35 mbar)

출처 및 근거

ORD 기록
ord-029bf58320aa46a2a60bd9b36d27916e
출처 데이터셋
uspto-grants-2009_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07560575B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트