홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Aluminium lithium hydride → methoxy-3-methyl-2,3,4,5-tetrahydro-1H-benzo[d]azepine

HRID 228256
인쇄

반응식

HRID 228256 반응식
[CH3:1][O:2][CH:3]1[C:9]2[CH:10]=[CH:11][CH:12]=[CH:13][C:8]=2[CH2:7][CH2:6][N:5]([CH3:14])[C:4]1=O.[H-].[Al+3].[Li+].[H-].[H-].[H-]>C1COCC1.CCOCC.C1COCC1>[CH3:1][O:2][CH:3]1[C:9]2[CH:10]=[CH:11][CH:12]=[CH:13][C:8]=2[CH2:7][CH2:6][N:5]([CH3:14])[CH2:4]1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 2

HCID 21226445Aluminium lithium hydrideHCID 68749213Methoxy-3-methyl-1,3,4,5-tetrahydrobenzo[d]azepin-2-one

생성물 1

HCID 68748342methoxy-3-methyl-2,3,4,5-tetrahydro-1H-benzo[d]azepine수율 1,028.5%

시약·촉매·용매 2

HCID 8028Tetrahydrofuran용매HCID 21868444Ether tetrahydrofuran용매

실험 절차

Dissolve methoxy-3-methyl-1,3,4,5-tetrahydrobenzo[d]azepin-2-one (375 g, 183 mmol, 1.0 eq) in THF (2.5 L) and add the solution via an addition funnel over 1 hour to slurry of lithium aluminium hydride (LAH) (175 g, 457 mmol, 2.5 eq) in ether/THF (4.5 L/2 L) in a 22 L reaction vessel under nitrogen while cooled in an ice/acetone bath. Add the starting amide at a rate to maintain the reaction temperature below 30° C. Stir the resulting mixture for 3 hours at room temperature under nitrogen. The reaction is determined to be complete by TLC. Cool the reaction mixture in an ice/acetone bath and quench slowly over 2 hours (off-gassing, exothermic) with water (175 mL) and 5.0 N NaOH solution (350 mL) added in succession. Filter the slurry and wash the solids with THF. Add sodium sulfate to the filtrate to remove any excess water, and then filter. Concentrate the filtrate down under vacuum to a dark oil to obtain the product methoxy-3-methyl-2,3,4,5-tetrahydro-1H-benzo[d]azepine (360 g, quantitative yield).

후처리

  1. additionadd the solution via an addition funnel over 1 hour
  2. temperaturewhile cooled in an ice/acetone bath
  3. temperatureto maintain the reaction temperature below 30° C
  4. temperatureCool the reaction mixture in an ice/acetone bath
  5. customquench slowly over 2 hours (off-gassing, exothermic) with water (175 mL) and 5.0 N NaOH solution (350 mL)
  6. additionadded in succession
  7. filtrationFilter the slurry
  8. washwash the solids with THF
  9. customAdd sodium sulfate to the filtrate to remove any excess water
  10. filtrationfilter
  11. concentrationConcentrate the filtrate down under vacuum to a dark oil

출처 및 근거

ORD 기록
ord-01d29f776a444f8ca05f789c9d7b853c
출처 데이터셋
uspto-grants-2009_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07560463B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트