홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Water → (4-Methoxybenzylidene)-(4-{[(4-methoxybenzylidene)amino]methyl}-phenyl)amine

HRID 229889
인쇄

반응식

HRID 229889 반응식
[C:1]1([CH3:7])[CH:6]=[CH:5][CH:4]=[CH:3][CH:2]=1.[NH2:8][C:9]1[CH:16]=[CH:15][C:12]([CH2:13][NH2:14])=[CH:11][CH:10]=1.[CH3:17][O:18][C:19]1[CH:20]=[CH:21][C:22]([CH:25]=O)=[CH:23][CH:24]=1.O.[C:28](OCC)(=[O:30])C>CCCCCCC.CCN(CC)CC.C(OCC)(=O)C.CCCCCCC>[CH3:28][O:30][C:4]1[CH:5]=[CH:6][C:1]([CH:7]=[N:8][C:9]2[CH:16]=[CH:15][C:12]([CH2:13][N:14]=[CH:25][C:22]3[CH:23]=[CH:24][C:19]([O:18][CH3:17])=[CH:20][CH:21]=3)=[CH:11][CH:10]=2)=[CH:2][CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 5

HCID 962Water2회HCID 1140TolueneHCID 8857Ethyl AcetateHCID 312444-MethoxybenzaldehydeHCID 4278144-Aminobenzylamine2회

생성물 1

HCID 57758902(4-Methoxybenzylidene)-(4-{[(4-methoxybenzylidene)amino]methyl}-phenyl)amine

시약·촉매·용매 3

HCID 8471Triethylamine용매
HCID 8900Heptane용매
HCID 21899848Ethylacetate heptane용매

반응 조건

온도
140 °C

실험 절차

430 ml of toluene and 40 ml (349 mmol) of 99% pure 4-aminobenzylamine are introduced into a four-neck flask with mechanical paddle stirrer, water trap and reflux condenser. A two-phase mixture is obtained owing to the low solubility of the amine. 96 ml (775 mmol) of 98% pure anisaldehyde are added, and the mixture is heated with an oil bath heated to 140° C. In the heating-up phase, the reaction mixture starts to boil at around 80° C., and cloudy water/toluene azeotrope distills into the water trap. After about 30 min, the maximum internal temperature is 114° C., and only clear toluene now distills over. 12.5 ml of water (corresponding to about 100% of theory of the two equivalents of water) separate out. A TLC check (plate deactivated by previously standing in NEt3(triethylamine) vapor-saturated tank, ethyl acetate/n-heptane 1:1 plus 1% NEt3) indicates complete conversion of the 4-aminobenzylamine. The mixture is actively cooled to room temperature. A mixture of 800 ml of n-heptane and 200 ml of ethyl acetate is then run slowly in, during which, after addition of only about 200 ml, a pale yellow precipitate separates out spontaneously. The mixture is stirred for 1 h, and the precipitate is filtered off with suction and dried under HV. Yield: 105.6 g.

후처리

  1. temperaturereflux condenser
  2. customA two-phase mixture is obtained
  3. temperaturethe mixture is heated with an oil bath
  4. customto boil at around 80° C.
  5. distillationcloudy water/toluene azeotrope distills into the water trap
  6. customis 114° C.
  7. distillationonly clear toluene now distills over
  8. temperatureThe mixture is actively cooled to room temperature
  9. additionafter addition of only about 200 ml
  10. filtrationthe precipitate is filtered off with suction
  11. customdried under HV

출처 및 근거

ORD 기록
ord-75a2a20301c1474bb1593d002fcf2723
출처 데이터셋
uspto-grants-2009_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07563888B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트