홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Toluene → HCID 9841284, 화합물

HRID 234780
노트
인쇄 미리보기

반응식

HRID 234780 반응식
[C@@H:1]1([N:25]2[C:34]3[N:33]=[CH:32][N:31]=[C:29](O)[C:28]=3[N:27]=[CH:26]2)[O:14][C@H:6]([CH:7](CCC([O-])=O)[OH:8])[C@@:4](CCC([O-])=O)([OH:5])[C@@:2]1(CCC([O-])=O)[OH:3].C[N:36]([CH3:39])C=O.[C:40]1(C)[CH:45]=[CH:44]C=[CH:42][CH:41]=1.S(Cl)(Cl)=O>O>[CH:39]1([NH:36][C:29]2[C:28]3[N:27]=[CH:26][N:25]([C:34]=3[N:33]=[CH:32][N:31]=2)[C@@H:1]2[O:14][C@H:6]([CH2:7][OH:8])[C@@H:4]([OH:5])[C@H:2]2[OH:3])[CH2:44][CH2:45][CH2:40][CH2:41][CH2:42]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 1140TolueneHCID 6228DimethylformamideHCID 24386Thionyl ChlorideHCID 178525501HCID 178525501, 화합물

생성물 1

HCID 9841284HCID 9841284, 화합물

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
65 °C

실험 절차

A mixture of 270.6 g of inosine-2',3',5'-tripropionate, 240 ml of N,N-dimethylformamide and 600 ml of toluene is heated to 65° C.; and over a period of 1 hour, 67.84 ml of thionyl chloride are added at a rate which maintains the internal temperature between 62°-65° C. The mixture is stirred at this temperature for an additional 2.5 hours and then cooled to 10° C. with an ice bath. After addition of 600 ml of water precooled to 10°-15° C. in an ice bath at a rate which maintains the temperature below 20° C., the organic layer is separated and washed with a total of 800 ml of 10% aqueous sodium chloride in four equal portions of 200 ml each. The organic layer containing crude 6-chloro-9-(2,3,5-tri-O-propionyl-β-ribofuranosyl)-9H-purine is added with stirring to 620 ml of cyclohexylamine heated to 105° C. over a period of 2 hours at a rate which maintains the internal temperature at 105° C. After this mixture is stirred at this temperature for an additional 17 hours, it is cooled to room temperature (25° C.) over approximately 2 hours with efficient stirring and then filtered in a Buchner funnel with suction. The solid containing N6 -cyclohexyladenosine and cyclohexylamine hydrochloride is washed with a total of 460 ml of toluene in four equal portions of 115 ml. each and transferred damp to a 5-liter flask equipped with a mechanical stirrer. After addition of 2 liters of aqueous saturated sodium bicarbonate solution and 2.5 liters of ethyl acetate, the mixture is stirred until all the solid dissolve (approximately 10-15 min.). The organic layer is separated; and the aqueous layer is extracted with 1.5 liters of ethyl acetate in two portions of 1 liter and 500 ml., respectively. The organic layers are combined and evaporated until about 3 liters of ethyl acetate (at 40° C., 100-200 mbar) is removed. To the residue, 500 ml. of heptane is added; and the resulting mixture is stirred for 30 minutes. The solids are separated on a Buchner funnel, and washed with a total of 300 ml of heptane in three equal portions of 100 ml each. The solids are then dried at 45°-50° C. (30-35 mbar) for approximately 3 hours to yield 148 g of crude N6 -cyclohexyladenosine as a white solid. This is transferred to a 1 liter round-bottomed flask equipped with a mechanical stirrer, and 175 ml. of 95% ethanol are added. The suspension is stirred for 15-20 min and 175 mL of tert-butyl ethyl ether are added. After stirring for 5 min, the suspension is cooled in an ice bath and stirred for an additional 15 minutes. This suspension is filtered in a Buchner funnel and washed with a total of 50 ml. of tert-butyl methyl ether in two equal portions of 25 ml. each. The solid is dried at 45°-50° C. (30-35 mbar) for 14 hours to yield 130 g of N6 -cyclohexyladenosine as a white solid (m.p. 185°-187° C.; yield 60.0%).

후처리

  1. custombetween 62°-65° C
  2. temperaturecooled to 10° C. with an ice bath
  3. customprecooled to 10°-15° C. in an ice bath at a rate which
  4. customthe temperature below 20° C.
  5. customthe organic layer is separated
  6. washwashed with a total of 800 ml of 10% aqueous sodium chloride in four equal portions of 200 ml each
  7. additionThe organic layer containing crude 6-chloro-9-(2,3,5-tri-O-propionyl-β-ribofuranosyl)-9H-purine
  8. additionis added
  9. stirringwith stirring to 620 ml of cyclohexylamine
  10. temperatureheated to 105° C. over a period of 2 hours at a rate which
  11. customat 105° C
  12. stirringAfter this mixture is stirred at this temperature for an additional 17 hours
  13. temperatureit is cooled to room temperature (25° C.) over approximately 2 hours
  14. stirringwith efficient stirring
  15. filtrationfiltered in a Buchner funnel with suction
  16. additionThe solid containing N6 -cyclohexyladenosine and cyclohexylamine hydrochloride
  17. washis washed with a total of 460 ml of toluene in four equal portions of 115 ml
  18. customeach and transferred damp to a 5-liter flask
  19. customequipped with a mechanical stirrer
  20. additionAfter addition of 2 liters of aqueous saturated sodium bicarbonate solution and 2.5 liters of ethyl acetate
  21. stirringthe mixture is stirred until all the solid
  22. dissolutiondissolve (approximately 10-15 min.)
  23. customThe organic layer is separated
  24. extractionand the aqueous layer is extracted with 1.5 liters of ethyl acetate in two portions of 1 liter and 500 ml
  25. customevaporated until about 3 liters of ethyl acetate (at 40° C., 100-200 mbar)
  26. customis removed
  27. additionof heptane is added
  28. stirringand the resulting mixture is stirred for 30 minutes
  29. customThe solids are separated on a Buchner funnel
  30. washwashed with a total of 300 ml of heptane in three equal portions of 100 ml each
  31. customThe solids are then dried at 45°-50° C. (30-35 mbar) for approximately 3 hours

출처 및 근거

ORD 기록
ord-a1467fc5f9784f858d423712c7473b82
출처 데이터셋
uspto-grants-1997_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05596094

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트