Hydrogen Peroxide → HCID 18796975, 화합물

HRID 235066

반응식

HRID 235066 반응식
[Cl:1][C:2]1[C:3]([C:8]#[N:9])=[N:4][CH:5]=[CH:6][CH:7]=1.OO.S([O-])([O-])=[O:13].[Na+].[Na+]>C(O)(=O)C.O>[Cl:1][C:2]1[C:3]([C:8]#[N:9])=[N+:4]([O-:13])[CH:5]=[CH:6][CH:7]=1

참가 물질

6

반응물 3

HCID 784Hydrogen PeroxideHCID 24437Sodium SulfiteHCID 8182583-Chloropyridine-2-carbonitrile

생성물 1

HCID 18796975HCID 18796975, 화합물수율 51.3%

시약·촉매·용매 2

HCID 176Acetic Acid용매HCID 962Water용매

반응 조건

온도
90 °C

실험 절차

To a solution of 3-chloro-2-cyanopyridine (40g, 0.29 mol) in 500 mL acetic acid added hydrogen peroxide (30%, 52 g, 0.45 mol) dropwise. After stirring at 90° C. for 18 h, the reaction is cooled to 25° C. and a solution of sodium sulfite (57 g, 0.45 mol) in H2O is added dropwise. The reaction is concentrated to remove the bulk of the acetic acid and the residue is partitioned between 1M NaOH and CH2Cl2. The CH2Cl2 layer is dried (MgSO4), filtered, concentrated, and recrystallized from EtOAc to provide 23 g (51%) of 3-chloro-2-cyanopyridine-N-oxide. The N-oxide from above (12.2 g, 79 mmol) was taken up in DMF (160 mL) at 0° C. Methyl thioglycolate (7.1 mL, 79 mmol) was added followed by sodium methoxide (8.5 g, 160 mmol) in portions. The RXN was stirred for 1 h. The RXN was poured onto ice and the resulting solid was collected by filtration, washed with water, dissolved in CH2Cl2, dried (MgSO4), filtered, concentrated, and recrystallized from EtOAc. 10.6 g (60%) of 3-amino-2-carbomethoxythieno[3,2-b]pyridine-4-oxide was obtained. The pyridine-N-oxide (10.6 g, 47 mmol) is mixed with phosphorous oxychloride (100 mL). The RXN is heated to 80° C. for 30 min. The RXN is concentrated and partitioned between CH2Cl2 and NaHCO3 sln. The CH2Cl2 layer is dried (MgSO4), filtered, cone, and chromatographed (5:1 hex:EtOAc). 8.3g (73%) of the 5-chloro and 2.0 g (18%) of the 7-chloro product were obtained: 1H NMR (300 MHz, CDCl3 (5-chloro)) δ3.92 (s, 3H), 6.15 (bs, 2H), 7.37 (d, 1H), 7.99 (d, 1H); MS (DCI/NH3) m/e 243 (M+H)+. 1H NMR (300 MHz, CDCl3 (7-chloro)) δ3.93 (s, 3H), 6.20 (bs, 2H), 7.41 (d, 1H), 8.54 (db, 1H); MS (DCI/NH3) m/e 243 (M+H)+.

후처리

  1. temperaturethe reaction is cooled to 25° C.
  2. concentrationThe reaction is concentrated
  3. customto remove the bulk of the acetic acid
  4. customthe residue is partitioned between 1M NaOH and CH2Cl2
  5. dry with materialThe CH2Cl2 layer is dried (MgSO4)
  6. filtrationfiltered
  7. concentrationconcentrated
  8. customrecrystallized from EtOAc

출처 및 근거

ORD 기록
ord-13a18932739844ca964128d5d2968a2a
출처 데이터셋
uspto-grants-1997_01
특허 번호
US05597823

연결된 노트

불러오는 중…