홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Picolinic acid → c-Met inhibitor 1

HRID 2386592
인쇄

반응식

HRID 2386592 반응식
[CH3:1][N:2]1[CH:6]=[C:5]([C:7]2[CH:8]=[CH:9][C:10]3[N:11]([C:13]([SH:16])=[N:14][N:15]=3)[N:12]=2)[CH:4]=[N:3]1.I[C:18]1[CH:26]=[CH:25][C:24]2[C:20](=[CH:21][N:22]([CH3:27])[N:23]=2)[CH:19]=1.N1C=CC=CC=1C(O)=O.C(=O)([O-])[O-].[Cs+].[Cs+]>CN(C=O)C.[Cu]I.O>[CH3:1][N:2]1[CH:6]=[C:5]([C:7]2[CH:8]=[CH:9][C:10]3[N:11]([C:13]([S:16][C:18]4[CH:26]=[CH:25][C:24]5[C:20](=[CH:21][N:22]([CH3:27])[N:23]=5)[CH:19]=4)=[N:14][N:15]=3)[N:12]=2)[CH:4]=[N:3]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 1018Picolinic acidHCID 10796Cesium carbonateHCID 401540075-iodo-2-methyl-2H-indazoleHCID 178480034HCID 178480034, 화합물

생성물 1

HCID 56650915c-Met inhibitor 1수율 87.2%

시약·촉매·용매 3

HCID 24350
Copper(1+) iodide; Copper(I) iodide; Cuprous iodide; Cuprous iodide (CuI)
촉매
HCID 962Water용매
HCID 6228Dimethylformamide용매

반응 조건

온도
100 °C

실험 절차

To a solution of 6-(1-methyl-1H-pyrazol-4-yl)-[1,2,4]triazolo[4,3-b]pyridazine-3-thiol (50 g, 268 mmol) in DMF (750 mL) is added 5-iodo-2-methyl-2H-indazole (55.5 g, 215.1 mmol), 2-Pyridinecarboxylic Acid (5.5 g, 44.7 mmoles), Copper (I) Iodide (4 g, 21.0 mmoles), and Cesium Carbonate (212.5 g, 652.2 moles). The mixture is under N2 and stirred at 100° C. for 10 hours. The reaction mixture is then cooled to room temperature and poured into water (2000 mL). After stirring at room temperature for 30 min, the mixture is extracted with a mixed solvent (2 L×2, CHCl3/IPA=3/1). The combined organic layer is then washed four times with mixed solution (25% NH4OH(aq)/brine=¼; 800 mL), sat. LiCl(aq) (1 L), sat. brine (1.5 L×2), and dry over Na2SO4. The organic solution is concentrated under reduced pressure to give a brown crude solid product. The crude product is triturated with ethyl acetate (800 mL) at room temperature for 3 hours and the pure product is collected by filtration to afford the title compound (68 g, 87.2%) as a white solid. MS (m/z): 363.0 (M+H).

후처리

  1. temperatureThe reaction mixture is then cooled to room temperature
  2. stirringAfter stirring at room temperature for 30 min
  3. extractionthe mixture is extracted with a mixed solvent (2 L×2, CHCl3/IPA=3/1)
  4. washThe combined organic layer is then washed four times with mixed solution (25% NH4OH(aq)/brine=¼; 800 mL), sat. LiCl(aq) (1 L), sat. brine (1.5 L×2)
  5. dry with materialdry over Na2SO4
  6. concentrationThe organic solution is concentrated under reduced pressure
  7. customto give a brown crude solid product
  8. customThe crude product is triturated with ethyl acetate (800 mL) at room temperature for 3 hours
  9. filtrationthe pure product is collected by filtration

출처 및 근거

ORD 기록
ord-491a521bd8ec47b9b449df26bee9bbd2
출처 데이터셋
uspto-grants-2012_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08268836B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트