홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium Carbonate → 5-Chloro-3'-phenyl-2-methylbiphenyl

HRID 241423
인쇄

반응식

HRID 241423 반응식
Br[C:2]1[CH:7]=[C:6]([Cl:8])[CH:5]=[CH:4][C:3]=1[CH3:9].[C:10]1([C:19]2[CH:24]=[CH:23][CH:22]=[CH:21][CH:20]=2)[CH:15]=[CH:14][CH:13]=[C:12](B(O)O)[CH:11]=1.C(=O)([O-])[O-].[Na+].[Na+]>CCCCCCCC[N+](CCCCCCCC)(CCCCCCCC)C.[Cl-].C1(C)C=CC=CC=1>[Cl:8][C:6]1[CH:5]=[CH:4][C:3]([CH3:9])=[C:2]([C:21]2[CH:22]=[CH:23][CH:24]=[C:19]([C:10]3[CH:15]=[CH:14][CH:13]=[CH:12][CH:11]=3)[CH:20]=2)[CH:7]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 10340Sodium CarbonateHCID 6098982-Bromo-4-chloro-1-methylbenzeneHCID 2734315(3-Phenylphenyl)boronic acid

생성물 1

HCID 670864905-Chloro-3'-phenyl-2-methylbiphenyl수율 77%

시약·촉매·용매 2

HCID 21218Trioctylmethylammonium chloride촉매
HCID 1140
Toluene
용매

실험 절차

To a 2 L round bottle flask equipped with reflux condenser, stir bar, nitrogen feed, and oil bath were added 2-bromo-4-chlorotoluene (20.67 g, 98.59 mmol), 3-biphenylboronic acid (20.50 g 103.52 mmol), sodium carbonate (158 mL, 315 mmol), Aliquat 336 (4.00 g) and toluene (600 mL). Solution was purged with nitrogen for 20 minutes before adding tetrakis(triphenylphospine)palladium(0) (1.14 g, 0.98 mmol) and purged for another 10 minute. The reaction was then heated under nitrogen for 18 hour. After cooing to ambient temperature, the organic phase was separated, washed with 10% HCl (200 mL), water (200 mL) and saturated brine (200 mL). This solution was dried with magnesium sulfate (50 g) for 3 hour and the solvent was removed by rotary evaporation. The crude product was filtered, washing with hexane. Product containing fractions were identified by UPLC and collected. Low boiling point is impurities and solvents were removed by Kruger-Rohr distillation to give the product as colorless oil (20.2 g, 77%).

후처리

  1. customTo a 2 L round bottle flask equipped
  2. temperaturewith reflux condenser
  3. customSolution was purged with nitrogen for 20 minutes
  4. custompurged for another 10 minute
  5. temperatureThe reaction was then heated under nitrogen for 18 hour
  6. customAfter cooing to ambient temperature
  7. customthe organic phase was separated
  8. washwashed with 10% HCl (200 mL), water (200 mL) and saturated brine (200 mL)
  9. dry with materialThis solution was dried with magnesium sulfate (50 g) for 3 hour
  10. customthe solvent was removed by rotary evaporation
  11. filtrationThe crude product was filtered
  12. washwashing with hexane
  13. additionProduct containing fractions
  14. customcollected
  15. customwere removed by Kruger-Rohr distillation

출처 및 근거

ORD 기록
ord-289fa374ccec4861ae43e9f8f42b1f9b
출처 데이터셋
uspto-grants-2014_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08648333B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트