홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Iodine → 2',3'-Difluoro-4'-iodo-4-pentylbiphenyl

HRID 241478
인쇄

반응식

HRID 241478 반응식
[F:1][C:2]1[C:7]([F:8])=[CH:6][CH:5]=[CH:4][C:3]=1[C:9]1[CH:14]=[CH:13][C:12]([CH2:15][CH2:16][CH2:17][CH2:18][CH3:19])=[CH:11][CH:10]=1.[I:20]I>O1CCCC1>[F:1][C:2]1[C:7]([F:8])=[C:6]([I:20])[CH:5]=[CH:4][C:3]=1[C:9]1[CH:14]=[CH:13][C:12]([CH2:15][CH2:16][CH2:17][CH2:18][CH3:19])=[CH:11][CH:10]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 807Iodine2회HCID 105874252,3-Difluoro-4'-pentyl-1,1'-biphenyl

생성물 1

HCID 670910372',3'-Difluoro-4'-iodo-4-pentylbiphenyl

시약·촉매·용매 1

HCID 8028Tetrahydrofuran용매2회

반응 조건

온도
-78 °C

실험 절차

2′,3′-Difluoro-4-pentylbiphenyl (612 g, 0.243 mol), and dry tetrahydrofurane (400 ml) were placed in 1 L flask equipped with mechanical stirrer, nitrogen inlet and outlet, pressure-equilibrated dropping funnel and thermometer. The reaction flask was flushed with nitrogen and minor flow was held during whole reaction time. The mixture was cooled down to −78° C. on the dry ice/acetone bath and then 2.5 mol/dm3 of n-butyllithium solution in hexane (100 ml 025 mol) was added dropwise, keeping the reaction temperature below −70° C. After addition of all n-butyllithium the mixture was stirred for additional 2 hours at −78° C. Next iodine solution in tetrahydrofurane (63.5 g, 0.25 mol) was added dropwise maintaining the temperature below −70° C. After addition of the iodine solution the cooling bath was removed and the mixture was stirred to reach the room temperature. Organic solvents were evaporated and the thick oily residue was diluted with hexane and treated with water solution of sodium sulfite to remove the remaining iodine. Phases were separated and hexane was evaporated. The residue was distilled under reduced pressure 1 mmHg collecting the fraction boiling at 174-175° C. The colourles liquid product 71 g was obtained with 78% of theor. yield.

후처리

  1. customequipped with mechanical stirrer, nitrogen inlet and outlet
  2. customThe reaction flask was flushed with nitrogen and minor flow
  3. addition2.5 mol/dm3 of n-butyllithium solution in hexane (100 ml 025 mol) was added dropwise
  4. customthe reaction temperature below −70° C
  5. additionAfter addition of all n-butyllithium the mixture
  6. temperaturemaintaining the temperature below −70° C
  7. customwas removed
  8. stirringthe mixture was stirred
  9. customthe room temperature
  10. customOrganic solvents were evaporated
  11. additionthe thick oily residue was diluted with hexane
  12. additiontreated with water solution of sodium sulfite
  13. customto remove the remaining iodine
  14. customPhases were separated
  15. customhexane was evaporated
  16. distillationThe residue was distilled under reduced pressure 1 mmHg
  17. customcollecting the fraction boiling at 174-175° C

출처 및 근거

ORD 기록
ord-838f4ffb14b545879076330363eab001
출처 데이터셋
uspto-grants-2014_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08652353B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트