홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sulfuric Acid → 2-Cyclopropyl-4-(4-fluorophenyl)-3-quinolinecarboxaldehyde

HRID 24282
인쇄

반응식

HRID 24282 반응식
[F:1][C:2]1[CH:7]=[CH:6][C:5]([C:8]2[C:17]3[C:12](=[CH:13][CH:14]=[CH:15][CH:16]=3)[N:11]=[C:10]([CH:18]3[CH2:20][CH2:19]3)[C:9]=2[C:21](OC)=[O:22])=[CH:4][CH:3]=1.[H-].COCCO[Al+]OCCOC.[Na+].[H-].N1CCOCC1.S(=O)(=O)(O)O>C1(C)C=CC=CC=1>[F:1][C:2]1[CH:7]=[CH:6][C:5]([C:8]2[C:17]3[C:12](=[CH:13][CH:14]=[CH:15][CH:16]=3)[N:11]=[C:10]([CH:18]3[CH2:19][CH2:20]3)[C:9]=2[CH:21]=[O:22])=[CH:4][CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 1118Sulfuric AcidHCID 8083MorpholineHCID 9901664Methyl 2-cyclopropyl-4-(4-fluorophenyl)quinoline-3-carboxylateHCID 21584525Sodium bis(2-methoxyethoxy)aluminiumhydride

생성물 1

HCID 99479742-Cyclopropyl-4-(4-fluorophenyl)-3-quinolinecarboxaldehyde수율 76.9%

시약·촉매·용매 1

HCID 1140
Toluene
용매
2회

반응 조건

온도
-5 °C

실험 절차

Methyl 4-(4′-fluorophenyl)-2-cyclopropylquinoline-3-carboxylate (32.1 g, 100 mmol) and toluene (300 ml) were placed in a different 1000 ml three-necked flask, and the system was replaced by nitrogen and cooled to −5° C. To this solution was added dropwise the entire amount of a toluene solution prepared earlier by mixing sodium bis(2-methoxyethoxy)aluminum hydride and morpholine, while maintaining the inner temperature to not higher than 0° C., and after completion of the addition, the mixture was heated to room temperature and stirred for 3 hr. This reaction mixture was added dropwise to a 15% aqueous sulfuric acid solution (200 ml) while maintaining the inner temperature to not higher than 10° C. The organic layer was separated from the mixture and the aqueous layer was extracted with toluene (30 ml). The extract was combined with the organic layer obtained earlier. The mixture was washed with water (100 ml), dried over anhydrous sodium sulfate and concentrated. The obtained residue was recrystallized from diisopropyl ether to give 4-(4′-fluorophenyl)-2-cyclopropylquinoline-3-carbaldehyde (22.4 g, yield 76%).

후처리

  1. customprepared earlier
  2. temperaturewhile maintaining the inner temperature to not higher than 0° C.
  3. additionafter completion of the addition
  4. temperaturethe mixture was heated to room temperature
  5. temperaturewhile maintaining the inner temperature to not higher than 10° C
  6. customThe organic layer was separated from the mixture
  7. extractionthe aqueous layer was extracted with toluene (30 ml)
  8. customobtained earlier
  9. washThe mixture was washed with water (100 ml)
  10. dry with materialdried over anhydrous sodium sulfate
  11. concentrationconcentrated
  12. customThe obtained residue was recrystallized from diisopropyl ether

출처 및 근거

ORD 기록
ord-38f4f2db40754086badfc3196e414a65
출처 데이터셋
uspto-grants-2005_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06855824B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트