홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Cesium carbonate → 2-Fluoro-6-(2H-1,2,3-triazol-2-yl)benzoic acid

HRID 243832
인쇄

반응식

HRID 243832 반응식
[F:1][C:2]1[CH:10]=[CH:9][CH:8]=[C:7](I)[C:3]=1[C:4]([OH:6])=[O:5].C([O-])([O-])=O.[Cs+].[Cs+].[NH:18]1[CH:22]=[CH:21][N:20]=[N:19]1>CCOC(C)=O.[Cu](I)I.O.CC(OC)(C)C.O1CCOCC1>[F:1][C:2]1[CH:10]=[CH:9][CH:8]=[C:7]([N:19]2[N:20]=[CH:21][CH:22]=[N:18]2)[C:3]=1[C:4]([OH:6])=[O:5]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 3

HCID 10796Cesium carbonateHCID 27333022-Fluoro-6-iodobenzoic acidHCID 178418936HCID 178418936, 화합물

생성물 1

HCID 670866272-Fluoro-6-(2H-1,2,3-triazol-2-yl)benzoic acid

시약·촉매·용매 5

HCID 83717Copper iodide촉매HCID 962Water용매2회
HCID 8857
Ethyl Acetate
용매
HCID 15413tert-Butyl methyl ether용매
HCID 312751,4-Dioxane용매

반응 조건

온도
60 °C

실험 절차

To a 2 L, 3-necked, round-bottomed flask equipped with an overhead mechanical stirrer, thermocouple probe, heating mantle, reflux condenser, and nitrogen inlet were added 2-fluoro-6-iodobenzoic acid (127.6 g, 480 mmol), copper iodide (4.57 g, 24 mmol), and Cs2CO3 (312.6 g, 959 mmol). To these solids were added dioxane (640 mL), then water (2.6 mL, 144 mmol), then 1H-1,2,3-triazole (55.6 mL, 959 mmol), and finally trans-1,2-dimethylcyclohexane-1,2-diamine (15.1 mL, 96 mmol). The mixture was then warmed to 60° C. for 30 min, then to 83° C. for 30 min, and then to 100° C. for 3 h. After the 3 h at 100° C., the mixture was cooled and then 1 L of MTBE and 1 L of water were added. After vigorous mixing, the layers were separated and the bottom aqueous layer was acidified to pH 1.72 with ˜148 mL of concentrated hydrochloric acid. The aqueous was then extracted twice with EtOAc. The combined organic layers were dried over Na2SO4, filtered, and concentrated to provide a dark oil. The oil was stirred overnight in EtOAc (450 mL) and the resulting precipitate was removed by filtration. The mother-liquors were concentrated to a brown solid (106.21 g, 75 wt % by quantitative HPLC, 79.7 g, 80%). 1H NMR (400 MHz, DMSO-d6): 8.22-8.13 (bs, 2H), 7.84-7.80 (m, 1H), 7.74-7.65 (m, 1H), 7.50-7.41 (m, 1H).

후처리

  1. customTo a 2 L, 3-necked, round-bottomed flask equipped with an overhead mechanical stirrer
  2. temperaturethermocouple probe, heating mantle
  3. temperaturereflux condenser, and nitrogen inlet
  4. waitto 100° C. for 3 h
  5. temperatureAfter the 3 h at 100° C., the mixture was cooled
  6. customAfter vigorous mixing, the layers were separated
  7. extractionThe aqueous was then extracted twice with EtOAc
  8. dry with materialThe combined organic layers were dried over Na2SO4
  9. filtrationfiltered
  10. concentrationconcentrated
  11. customto provide a dark oil
  12. customthe resulting precipitate was removed by filtration
  13. concentrationThe mother-liquors were concentrated to a brown solid (106.21 g, 75 wt % by quantitative HPLC, 79.7 g, 80%)

출처 및 근거

ORD 기록
ord-981c61d9dafa411d9b659a00eb4c898c
출처 데이터셋
uspto-grants-2014_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08653263B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트