반응식
Cl[C:2](=[C:7]([Cl:12])[C:8]([F:11])([F:10])[F:9])[C:3]([F:6])([F:5])[F:4].II>>[Cl:12][CH:7]([CH2:2][C:3]([F:4])([F:5])[F:6])[C:8]([F:11])([F:10])[F:9]참가 물질
반응 조건
- 온도
- 250 °C
실험 절차
2,3-Dichlorohexafluorobut-2-ene (100 g) and iodine (55 g) were added to a 400 mL shaker tube. The tube was sealed, cooled, evacuated, and charged with 1500 psi of hydrogen at room temperature. The tube was then heated to 230° C. for 1 hour, 250° C. for 2 hours, and 260° C. for 15 hours. The tube was then cooled to room temperature, vented, and opened. The purple liquid was washed with water and then analyzed by GC/IR. Analysis of the washed liquid showed that it contained about 84% 2-chloro-1,1,1,4,4,4-hexafluorobutane, about 13% 2,3-dichloro-1,1,1,4,4,4-hexafluorobutane and about 1% 1,1,1,4,4,4-hexafluorobutane. The liquid was distilled on a concentric tube column yielding 35 g (41% isolated yield) of 2-chloro-1,l,1,4,4,4-hexafluorobutane (HCFC-346 mdf) as a clear liquid with a b.p. of 50.9°-51.4° C. 1H NMR (CHCl3 as internal standard): 4.4 ppm, complex, 1H; 2.9 ppm, complex, IH; 2.7 ppm, complex, 1H. 19F NMR (CCl3F) as internal standard): 64.7 ppm, t, 1F; -76 ppm, d, 1F GC/IR showed an identical spectrum to an authentic sample.
후처리
- customThe tube was sealed
- temperaturecooled
- customevacuated
- additioncharged with 1500 psi of hydrogen at room temperature
- temperatureThe tube was then cooled to room temperature
- washThe purple liquid was washed with water
- distillationThe liquid was distilled on a concentric tube column
출처 및 근거
- ORD 기록
- ord-3ff1daa86afd43b8bad3de3a183b7528
- 출처 데이터셋
- uspto-grants-1993_05
- 특허 번호
- US05208396
연결된 노트
불러오는 중…