홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Thioglycolic Acid → 2-(2,5-Dichlorophenyl)-2-mercaptoacetic acid

HRID 248599
인쇄

반응식

HRID 248599 반응식
Br[C:2]1[CH:7]=[C:6]([Cl:8])[CH:5]=[CH:4][C:3]=1[Cl:9].[OH-].[K+].[C:12]([OH:16])(=[O:15])[CH2:13][SH:14].ClCC([O-])=O.[Na+]>CN1CCCC1=O>[Cl:9][C:3]1[CH:4]=[CH:5][C:6]([Cl:8])=[CH:7][C:2]=1[CH:13]([SH:14])[C:12]([OH:16])=[O:15]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 1133Thioglycolic AcidHCID 14797Potassium HydroxideHCID 150332-Bromo-1,4-dichlorobenzeneHCID 23665759Sodium chloroacetate

생성물 1

HCID 224923292-(2,5-Dichlorophenyl)-2-mercaptoacetic acid수율 71.7%

시약·촉매·용매 1

HCID 13387
N-methyl-2-pyrrolidone
용매

실험 절차

Using the same procedure as in Example 8, 45.2 g (0.2 mol) of 1-bromo-2,5-dichlorobenzene, 23.7 g (0.4 mol) of 95% potassium hydroxide, 18.4 g (0.2 mol) of thioglycolic acid and 320 g of N-methyl-2-pyrrolidone were added, followed by stirring at 140° to 150° C. for 2 hours. Then, 30.4 g (0.26 mol) of sodium monochloroacetate was added to the reaction solution, followed by stirring at 90° C. for 1 hour. After distilling off the solvent, 300 g of water and 50 g of toluene were added for layer separation. To the water layer was added 45 g of concentrated hydrochloric acid, and the mixture was cooled to room temperature. The resulting crystal was filtered and dried to yield 34.0 g of 2,5-dichlorophenylthioglycolic acid with a yield of 71.7%. The results are given in Table 2.

후처리

  1. additionwere added
  2. stirringby stirring at 90° C. for 1 hour
  3. distillationAfter distilling off the solvent, 300 g of water and 50 g of toluene
  4. additionwere added for layer separation
  5. additionTo the water layer was added 45 g of concentrated hydrochloric acid
  6. filtrationThe resulting crystal was filtered
  7. customdried

출처 및 근거

ORD 기록
ord-9915deca733e4f2b99d128d10388e304
출처 데이터셋
uspto-grants-1993_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05210291

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트