Huagongshe화공사 화학 정보 인쇄 보고서 · 연구 참고용
HRID 276181생성일: 2026년 10월 26일
Chlorotrimethylsilane → (E)-3-cyclohexyl-2-(4-methanesulfonyl-phenyl)-acrylic acid methyl ester
https://huagongshe.com/reaction/276181
참여 물질
| 역할 | 이름 | HCID | 투입량 |
|---|
| 반응물 | Chlorotrimethylsilane | HCID 6397 | — |
| 반응물 | 1,2-Dibromoethane | HCID 7839 | — |
| 반응물 | Triphenylphosphine | HCID 11776 | — |
| 반응물 | Ammonium Chloride | HCID 25517 | — |
| 반응물 | 1-Bromo-4-(methylsulphonyl)benzene | HCID 77014 | — |
| 반응물 | (E)-3-cyclohexyl-2-iodo-acrylic acid methyl ester | HCID 86583971 | — |
| 촉매 | Zinc | HCID 23994 | — |
| 촉매 | (1E,4E)-1,5-diphenylpenta-1,4-dien-3-one; palladium | HCID 6505921 | — |
| 용매 | Tetrahydrofuran | HCID 8028 | — |
| 생성물 | (E)-3-cyclohexyl-2-(4-methanesulfonyl-phenyl)-acrylic acid methyl ester | HCID 67483145 | 99.8% |
반응 단계
A mixture of zinc dust (2.6 g, 40 mmol, Aldrich, −325 mesh) and dry tetrahydrofuran (3 mL) under argon was treated with 1,2-dibromoethane (0.37 g, 2 mmol). The zinc suspension was then heated with a heat gun to ebullition, allowed to cool, and heated again. This process was repeated three times to make sure the zinc dust was activated. The activated zinc dust suspension was then treated with trimethylsilyl chloride (217 mg, 2 mmol), and the suspension was stirred for 15 min at 25° C. The reaction mixture was then treated dropwise with a solution of (E)-3-cyclohexyl-2-iodo-acrylic acid methyl ester (5.88 g, 20 mmol) in dry tetrahydrofuran (5 mL) over 5 min. During the addition, the temperature rose to 50° C. The reaction mixture was then stirred at 40-45° C. for 1 h and then stirred overnight at 25° C. The reaction mixture was then diluted with dry tetrahydrofuran (10 mL), and the stirring was stopped to allow the excess zinc dust to settle down (˜2 h). In a separate reaction flask, bis(dibenzylideneacetone)palladium(0) (270 mg, 0.5 mmol) and triphenylphosphine (520 mg, 2 mmol) in dry tetrahydrofuran (25 mL) was stirred at 25° C. under argon for 10 min and then treated with 4-bromophenyl methyl sulfone (4.23 g, 18 mmol) and the freshly prepared zinc compound in tetrahydrofuran. The resulting brick red solution was heated at 50° C. for 24 h, at which time, thin layer chromatography analysis of the reaction mixture indicated the absence of starting material. The reaction mixture was cooled to 25° C. and then poured into a saturated aqueous ammonium chloride solution (150 mL), and the organic compound was extracted into ethyl acetate (3×100 mL). The combined organic extracts were washed with a saturated aqueous sodium chloride solution (1×200 mL), dried over anhydrous magnesium sulfate, filtered, and concentrated in vacuo. Flash chromatography (Merck Silica gel 60, 230-400 mesh, 3/2 hexanes/ethyl acetate) afforded (E)-3-cyclohexyl-2-(4-methanesulfonyl-phenyl)-acrylic acid methyl ester (5.79 g, 99%) as a low melting white solid: EI-HRMS m/e calcd for C17H22O4S (M+) 322.1238, found 322.1236.
출처 및 근거
| DOI | 10.6084/m9.figshare.5104873.v1 |
|---|
| 특허 번호 | US06353111B1 |
|---|
| 출처 데이터셋 | uspto-grants-2002_03 |
|---|
| ORD ID | ord-9b8c6ede57214e33b5f781e84b58e7a5 |
|---|
| 출처 메모 | uspto-grants-2002_03 |
|---|