돌아가기
Huagongshe화공사 화학 정보 인쇄 보고서 · 연구 참고용
HRID 276238생성일: 2026년 10월 25일

Chlorotrimethylsilane → (E)-3-cyclohexyl-2-(4-methanesulfonyl-3-trifluoromethyl-phenyl)-acrylic acid methyl ester

https://huagongshe.com/reaction/276238

반응식

참여 물질

역할이름HCID투입량
반응물ChlorotrimethylsilaneHCID 6397—
반응물1,2-DibromoethaneHCID 7839—
반응물TriphenylphosphineHCID 11776—
반응물Ammonium ChlorideHCID 25517—
반응물4-Bromo-1-(methylsulfonyl)-2-(trifluoromethyl)benzeneHCID 22315222—
반응물(E)-3-cyclohexyl-2-iodo-acrylic acid methyl esterHCID 86583971—
촉매ZincHCID 23994—
촉매(1E,4E)-1,5-diphenylpenta-1,4-dien-3-one; palladiumHCID 6505921—
용매TetrahydrofuranHCID 8028—
생성물(E)-3-cyclohexyl-2-(4-methanesulfonyl-3-trifluoromethyl-phenyl)-acrylic acid methyl esterHCID 6748295099%

반응 조건

온도25 °C

반응 단계

A mixture of zinc dust (1.3 g, 20 mmol, Aldrich, −325 mesh) and dry tetrahydrofuran (2 mL) under argon was treated with 1,2-dibromoethane (187 mg, 1 mmol). The zinc suspension was then heated with a heat gun to ebullition, allowed to cool, and heated again. This process was repeated three times to make sure the zinc dust was activated. The activated zinc dust suspension was then treated with trimethylsilyl chloride (110 mg, 1 mmol), and the suspension was stirred for 15 min at 25° C. The reaction mixture was then treated dropwise with a solution of (E)-3-cyclohexyl-2-iodo-acrylic acid methyl ester (2.5 g, 8.5 mmol) in dry tetrahydrofuran (3 mL) over 5 min. After the addition, the reaction mixture was stirred for 1 h at 40-45° C. and then stirred overnight at 25° C. The reaction mixture was then diluted with dry tetrahydrofuran (4 mL), and the stirring was stopped to allow the excess zinc dust to settle down (˜2 h). In a separate reaction flask, bis(dibenzylideneacetone)palladium(0) (108 mg, 0.2 mmol) and triphenylphosphine (209 mg, 0.8 mmol) in dry tetrahydrofuran (10 mL) was stirred at 25° C. under argon for 10 min and then treated with 4-bromo-1-methanesulfonyl-2-trifluoromethyl-benzene (2.12 g, 7 mmol) and the freshly prepared zinc compound in tetrahydrofuran. The resulting brick red solution was heated at 40-45° C. for 2 d. The reaction mixture was cooled to 25° C. and then poured into a saturated aqueous ammonium chloride solution (100 mL), and the organic compound was extracted into ethyl acetate (3×75 mL). The combined organic extracts were washed with a saturated aqueous sodium chloride solution (1×100 mL), dried over anhydrous magnesium sulfate, filtered, and concentrated in vacuo. Biotage chromatography (FLASH 40M, Silica, 9/1 to 3/1 hexanes/ethyl acetate) afforded (E)-3-cyclohexyl-2-(4-methanesulfonyl-3-trifluoromethyl-phenyl)-acrylic acid methyl ester (2.7 g, 99%) as a viscous oil: EI-HRMS m/e calcd for C18H21F3O4S (M+) 391.1191, found 391.1200.

출처 및 근거

DOI10.6084/m9.figshare.5104873.v1
특허 번호US06353111B1
출처 데이터셋uspto-grants-2002_03
ORD IDord-c88b18dee51042ab964cf563eb644b73
출처 메모uspto-grants-2002_03