홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Silica → 17alpha-Acetyl-17beta-hydroxy-6,16-dimethyleneandrost-4-en-3-one

HRID 280078
인쇄

반응식

HRID 280078 반응식
[C:1]([C@:3]1([OH:25])[C:8](=[CH2:9])[CH2:7][C@H:6]2[C@H:10]3[C@H:20]([CH2:21][CH2:22][C@:4]12[CH3:5])[C@:18]1([CH3:19])[C:13](=[CH:14][C:15](=[O:23])[CH2:16][CH2:17]1)[C:12](=[CH2:24])[CH2:11]3)#[CH:2].[O:26]=[Si]=O.C([O-])(=O)C.[Na+]>O>[C:1]([C@:3]1([OH:25])[C:8](=[CH2:9])[CH2:7][C@H:6]2[C@H:10]3[C@H:20]([CH2:21][CH2:22][C@:4]12[CH3:5])[C@:18]1([CH3:19])[C:13](=[CH:14][C:15](=[O:23])[CH2:16][CH2:17]1)[C:12](=[CH2:24])[CH2:11]3)(=[O:26])[CH3:2]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 24261SilicaHCID 517045Sodium AcetateHCID 1331492917alpha-Ethynyl-17beta-hydroxy-6,16-dimethyleneandrosta-4-en-3-one

생성물 1

HCID 1331493117alpha-Acetyl-17beta-hydroxy-6,16-dimethyleneandrost-4-en-3-one

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
45 °C

실험 절차

9.0 Kg of 17α-ethynyl-17β-hydroxy-6,16-dimethyleneandrost-4-en-3-one is added to a reactor vessel, flushed with nitrogen until the oxygen content is less than 4%. 108 Liters (85.3 Kg) of acetone is added and the solution heated to 45° C. A catalyst solution (prepared by the addition of 0.72 liters conc. sulfuric acid to 10.8 liters of deionized water, followed by the addition of 576 grams of mercuric oxide, red powder to the dilute acid) is added to the reaction mixture and stirred at 45° C. until the reaction is complete, as monitored by TLC. The reaction mixture is cooled to less than 25° C. and 2.3 Kg Celite 545, 2.2 Kg sodium acetate and 20 liters of water added and mixture stirred for 15 min. The resulting crude product is filtered using a pot filter coated with Celite 545. The reactor is rinsed with 50 liters of acetone and filtered. The combined filtrate is concentrated under vacuum to about 50 liters, cooled to below 20° C. and stirred for 15 min. The slurry is filtered and the filter cake washed with 10 liters of acetone and 20 liters of water. The filter cake is dried in a vacuum oven at 50° C. to yield 17α-acetyl-17β-hydroxy-6,16-dimethyleneandrost-4-en-3-one (mercury content 10,500 ppm).

후처리

  1. customflushed with nitrogen until the oxygen content
  2. addition108 Liters (85.3 Kg) of acetone is added
  3. customA catalyst solution (prepared by the addition of 0.72 liters conc. sulfuric acid to 10.8 liters of deionized water
  4. additionis added to the reaction mixture
  5. temperatureThe reaction mixture is cooled to less than 25° C.
  6. stirringmixture stirred for 15 min
  7. filtrationThe resulting crude product is filtered
  8. washThe reactor is rinsed with 50 liters of acetone
  9. filtrationfiltered
  10. concentrationThe combined filtrate is concentrated under vacuum to about 50 liters
  11. temperaturecooled to below 20° C.
  12. stirringstirred for 15 min
  13. filtrationThe slurry is filtered
  14. washthe filter cake washed with 10 liters of acetone and 20 liters of water
  15. customThe filter cake is dried in a vacuum oven at 50° C.

출처 및 근거

ORD 기록
ord-788cffc4036c42ba988d443c58839c4b
출처 데이터셋
uspto-grants-1986_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04588529

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트