Br[C:2]1[CH:3]=[C:4]2[CH2:11][CH2:10][CH:9]([C:12]3[CH:17]=[CH:16][C:15]([Cl:18])=[C:14]([Cl:19])[CH:13]=3)[O:8][C:5]2=[N:6][CH:7]=1.OO.C(OCC)(=[O:24])C.CCCCCC>O>[Cl:19][C:14]1[CH:13]=[C:12]([CH:9]2[O:8][C:5]3=[N:6][CH:7]=[C:2]([OH:24])[CH:3]=[C:4]3[CH2:11][CH2:10]2)[CH:17]=[CH:16][C:15]=1[Cl:18]6-Bromo-2-(3,4-dichlorophenyl)-3,4-dihydro-2H-pyrano[2,3-b]pyridine (1.5 g) was converted to the corresponding lithio intermediate according to the procedure described in Example 23 and then quenched at -90° C. with 1.3 ml of tri-n-butyl borate. The resulting dark solution was stirred at -75° C. for 2 hours and then allowed to warm to 0° C. The mixture was then acidified with 3N hydrochloric acid, the organic phase was separated, and the aqueous layer was extracted with ether. The combined organic layers were concentrated to give a light brown, tacky solid. To this material was added 25 ml of 30% hydrogen peroxide and the resulting mixture was warmed at 60° C. for 30 minutes. The mixture was then cooled and diluted with 75 ml of water and the resulting mixture was extracted with two 50-ml portions of methylene chloride. The methylene chloride extracts were combined, washed with aqueous saturated sodium chloride solution, dried over sodium sulfate and concentrated to give a yellow solid. Column chromatography (silica gel, 3% ethyl acetate/hexane) gave 2-(3,4-dichlorophenyl)-3,4-dihydro-6-hydroxy-2H-pyrano[2,3-b]pyridine melting at about 218°-219° C.